Cars & Trucks Logo

Related Topics:

justus Posted on Apr 03, 2015

I got a lexus ls400 vvti importad engin and gearbox it wont go over 140 km per hour how do i fix that

5 Related Answers

mkv0525

Mike Vincent

  • 358 Answers
  • Posted on May 21, 2009

SOURCE: R & R 1991 Lexus Ls400 Gear shift knob

slide the lower part of shifter handle down and you will find two screws, but there is 2 wires coming in from center console for overdrive button.you have to remove the center console cover and remove the 2 wires from connector and then pull up threw handle.when you go back together you will have to guide them back threw the handle.

Ad

Anonymous

  • 11896 Answers
  • Posted on Aug 07, 2009

SOURCE: Replace/fix starter on 1991 Lexus LS400

Not too bad. Not much room, just enough to drop the starter. It is probably easier to go up through exhaust if you can get your exhaust shield off the manifold .

Anonymous

  • 64 Answers
  • Posted on Oct 17, 2009

SOURCE: celica oil consumption

Try cleaning your engine with an engine flush such as AMSOIL engine flush and then draining your oil once the flush is complete. It will clean the interior of the engine and drain out the contaminants. Once this has been perfomed replace the old oil with completely synthetic AMSOIL or Mobil 1. These oils are know for there ability to clean an engine and to reduce the chances of sludge formation in toyota engines. This is a good place to start before you go spending thousands on a new engine!!

Testimonial: "Thanks!Done engine flush&oil change today,also added some engine treatment in there for gd measure,all that's left is to wait&see. thanks v much :)"

Anonymous

  • 15 Answers
  • Posted on May 18, 2010

SOURCE: how do i change my spark plugs on my lexus ls400

there located on top of engine under the cover thats says V8 FOUR CAM 32, 4 S.P. on each side,remove both covers and its easy access after that.

Anonymous

  • 1 Answer
  • Posted on Nov 30, 2010

SOURCE: how to repair code13 - RPM signal no.2 Lexus Ls400

HOW TO FIX CODE 13 1995 LEXUS SC400

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2helpful
2answers

Hi i want to know if i can fit a gearbox that was mounted on a 4zz vvti engine, on a 3zz vvti engine?

HI There from past conversions of this nature gearbox lines up to engine block.MOUNTINGS and gearbox cross member also does, importantly starter motor must be situated in front of a transverse engine opposite cooling system radiator. Please do remember you might experience gear ratio issues not of a serious note.Due to engine capacity (horse power) differs.
0helpful
1answer

Will a 1994 Lexus ls400 air flow sensor fit on a 1999 Lexus ls400

They may fix, but keep in mind that 1994 is non -VVTI and the 1999 is VVTI. (They would have different specs.) Therefore different timing, GL.
0helpful
1answer

Will the motor from a 96 Lexus ls400 fit into my 99 Lexus gs400

It should fit. The issue is the engine wiring harness reference: 1uz-fe(1996) and 1uz-fe vvti (1999). and some engine accessories relocation. GL
0helpful
1answer

My 1995 Lexus LS400 has 120-130 psi compression in all 8 cylinders, does anyone KNOW what factory specifications are?

1995 Lexus LS400 specifications, information, data, photos ...

www.carfolio.com/specifications/models/car/?car=23507
1995 Lexus LS400 automobile specifications & information. ... The Lexus LS400's engine is a naturally aspirated petrol, 4 litre, double overhead ... 4 valves per cylinder... bmep (brake mean effective pressure), 1171.5 kPa (169.9 psi ).
0helpful
2answers

Why do my 1995 ls400 engage in a gear ,feel the jerk but only make a noise ,speedometer shows speed when in gear but wont move

Try adding a bottle of Lucas Oil Transmission Stabilizer...add when motor is warm...tranny filter is most likely clogged and dirty...this additive works on most...
0helpful
1answer
0helpful
1answer

I have a metal on metal sound when my Jimmy is in acceleration only and between 80 and 100 km per hour. It sounds like two metal discs rubbing side by side. If you let off the gas pedal, the noise is gone....

if its an auto gearbox could be clutch cover springs falling apart or the dif needs replacing. if you roll along with engine off and auto box in neutral and no noise then its clutch / gearbox.
0helpful
1answer

Car doesn't respond when gas pedal is pushed when it is driven in hot weather; engine does not stall (1991 lexus ls400

I had the same problem with my 1992 LS400. My Lexus mechanic fixed it by replacing the MAF(Mass Air Flow).

This used to drive me crazy when the weather was hot.
0helpful
2answers

I have a problem with my1993 Lexus LS400. It doesn't have any power at all. I have had the mass air flow sensor replaced, and new cadlydic converters put on and still no power. It start up without a...

it needs an ignition coil, find out which cylinders it is not firing on and replace that coil, it has 2 coils one per 4 cylinders ur car is running on 4 my name is joe all auto key west 305 292 6662
1helpful
2answers
Not finding what you are looking for?

49 views

Ask a Question

Usually answered in minutes!

Top Lexus Experts

ROBERT GARCIA
ROBERT GARCIA

Level 3 Expert

926 Answers

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6988 Answers

Are you a Lexus Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...