Question about 2007 Toyota Corolla
97 000 mi is about time for big service. Denso spark plugs,air filter and PCV valve..remove the hose from the throttle body and clean the throttle with carb cleaner.Don't spray direct inside! Spray on clot and wipe clean inside with wide open throttle. inspect for vacuum leak and broken engine mounts.
Posted on Apr 03, 2015
If you have Diesel engine this could be caused by dual-mass wheel getting worn-out. You can probably safely drive few thousands miles more before it gets really worse. I was advised to replace clutch together with dual-mass wheel, they work together. DMW can be new or recoditioned.
Posted on Apr 02, 2015
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
More often than not steering wheel vibration is caused by uneven wheel balancing. The accident might have caused some of the correcting lead weights on either of the front wheels to be dislodged.
Hope this be of some help. Pls post back should you need additional information.
Good luck, kind regards and thank you for using FixYa.
Posted on Jun 11, 2008
Hello. A vibration in the steerign wheel indicates an issue with the front tires. They are either out of balance, and would need to be rebalanced, or it is possible (although remotely) that the tire(s) may be compromised (after hitting a pothole), the belts in the tire may be corrupted. What I would suggest is to take the car to a reputable tire place, and get the balance checked. While the tire is on the balancer, the Tech will be able to see if the tire is out-of-round due to possible road damage. Probably just a tire balance problem. Thanks for choosing FixYA for assistance.
Posted on Feb 03, 2009
adjust the accelerator cable.
Posted on Mar 15, 2010
Testimonial: "i thought the idle was ecu controlled,but i see what your saying,ajust cable stop.ie allen screw with locknut to bring up revs.thanks"
mcdevito75 here, A vibration while idleing is not really normal, a rough idle could be many things, wrong octane gas, dirty gas filter, dirty smog controls. Have your local shop take a look for you.
Posted on Jul 13, 2010
Tips for a great answer:
Apr 02, 2015 | 2007 Toyota Corolla
Jul 11, 2012 | Cars & Trucks
May 24, 2011 | Toyota Corolla Cars & Trucks
Jan 18, 2011 | 2002 Toyota Corolla
Feb 10, 2010 | 2007 Toyota Corolla
Oct 28, 2009 | 2006 Toyota Matrix
Sep 24, 2009 | Toyota Corolla Cars & Trucks
Apr 28, 2009 | 1996 Toyota Corolla
Jan 03, 2009 | 1992 Mazda MX-3
128 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: