Question about 2007 Toyota Corolla

Open Question

My power inverter inside the console between seats} Does not work and I

Am having trouble figuring out where it connects to the wiring harness and which exact fuse is for this.

Posted by on


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

I have a 2007 yukon Danali xl, and my power seats sometimes works and sometimes don't. What could make them come on and off like that? Please help!!

Could be a bad wiring harness, or just a loose connection under the seat where the power module connects to the cars wiring harness, it could also just be a simple matter of a loose fuse making partial contact from time to time. Hope this helps. .... ohhh also if the seat has been wet it could be causing the motor (s) in the seat adjustment unit (s) to short out.

Apr 16, 2016 | Cars & Trucks

1 Answer

Is the connector there on the harness under the seat for power options even if i have manual seats?

There is a good chance of it, manufacturers figured out that it can be cheaper to make one part for all models and options, if there is a separate fuse for seats you might need to add it to the fuse box to power that part of the harness up, but there is a good chance that if you have an extra connector under the drivers seat that you are good to go.

Aug 03, 2014 | 2001 Ford Taurus

1 Answer

How to wire a range rover power seat

There are 4 electric motors under each seat and a 5th inside the back rest. Also under each seat is a module containing the relay and memory module It is possible to run new wires but the job will be much simpler if you have (or can get) a pair of original wiring harnesses to go between the module and the harness behind the centre console (remove ashtray, lighter and storage bin) Spade terminals can be used if the module is missing. Make sure the wiring colours all match.

Of course, this is a simplified explanation. Go to for more detail

Jul 29, 2014 | 2002 Land Rover Range Rover

1 Answer

Power seat wiring diagram

original harness was set up for seat belt indicator and such..may need to run a separate power coupling for the power seats to work..

Dec 15, 2013 | Nissan Maxima Cars & Trucks

1 Answer

Seat heaters and electric seats stopped working. Could this be associated with a fuse problem?

check the wiring harness below the seat. The harness includes the power to the driver power seat as well as the seat heaters for both fron seats. My 2003 has a contact issue where it only works when another person puts pressure around the harness and wires (Bad Connection). This happened after 2 years of use with this harness. harness has been replaced 3 times over 7 years

Jan 18, 2011 | 2005 Chevrolet Tahoe

1 Answer

9 position power seats dont go back or forward in98 pontiac ssei

Check the wiring harness connect under the seat and carpeting for a break in the wires to the seat. If no problem is found, then the seat motor is bad.

Jul 19, 2009 | 1986 Chevrolet Caprice

1 Answer

My Deville drivers seat does'nt move at all.

the drivers seat wiring harness is rubbed through and shorted to the metal frame of the seat, pull the seat out and remove the wiring harness look for a bare wire, repair that.

Jun 29, 2009 | 2001 Cadillac DeVille

4 Answers

I have a 2000 cadillac catera my radio, maplight, high beam light, heated seats, and onstar does not work when I start the engine. when I turn it off they work until I open the door. PLEASE HELP

Did you recently have a loss of power to the car? change the battery? if so, you need to reset your system. My husband and I just figured this out this weekend. His sunroof hasn't worked in two years and it turns out you have to reset all the power options in the car. Google 2000 cadillac catera %calibrate ETC% loss of power, you'll find the step by step instructions for recalibrating the car's computer and resetting the power options

Mar 15, 2009 | 2000 Cadillac Catera

1 Answer

8 way power seat swap for power heated seat

i put new cars to gether an if it doesnt hav the acessories it wont have the harness u need,,maybe sumtymes they do but if ucan run aseperate switch itll work use the right amp rated wire or ull have more heat (fire)?thats about 12feet of wire they can save they will save if possible(wire harness) too bad i cant fix my own car thou,,,lol..

Nov 10, 2008 | 1998 Chevrolet K1500

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

36 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts


Level 3 Expert

85206 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22484 Answers

Jonah Oneal

Level 3 Expert

14092 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides