I need a diagram to put a serpentine belt on it bypassing the air conditioner compressor

ck here..

https://www.justanswer.com/cadillac/4hbpm-cadillac-deville-need-bypass-ac-compressor-1995.html

bypass pully

https://shop.advanceautoparts.com/find/1995-cadillac-deville-air-conditioning-compressor-bypass-pulley.c5956

That isn't the way to do it. You should have a bypass pulley, which keeps the route and the angles and the same length belt.

Details of bypass and the serpentine belt diagram in the link

https://www.google.com/search?q=2006+Nissan+Altima.+Serpentine+belt+diagram+no+air+conditioning&tbm=isch&ved=2ahUKEwiT2pXX38H0AhWQsHIEHZE8ARMQ2-cCegQIABAA&oq=2006+Nissan+Altima.+Serpentine+belt+diagram+no+air+conditioning&gs_lcp=CgNpbWcQAzoHCCMQ7wMQJ1CQGliJTmC4aWgBcAB4AIABa4gBnwiSAQQxMi4xmAEAoAEBqgELZ3dzLXdpei1pbWfAAQE&sclient=img&ei=0femYdOtEpDhytMPkfmEmAE&bih=937&biw=1920&rlz=1C1QJDB_enCA643CA644

..

Without the compressor, don't you need to put a different pulley in its place in order to reuse your existing serpentine belt? I'd read what these guys have to say before going any further:

http://www.wranglerforum.com/f218/deleting-air-conditioner-1993890.html%3famp=1

Is there any particular reason why you want to eliminate your compressor? If you don't turn on the air, the compressor freewheels, so why bother removing it?

Odds are you can't. The ac compressor is mounted in the belt routing so it would need the pulley to keep the belt tight.
You can get a used compressor from a salvage yard and mount it in place of your old part if necessary. It will allow the belt to run even if it has no freon in the system.
There are a few vehicles that a replacement dummy pulley was designed for, but I am not aware of one for your vehicle. Usually if you try to run the belt without the compressor pulley, it will rub against something or not allow the belt to run in the right direction.

did you remove the air compressor ,and if you did you need to put something in its place for the belt tensioner will not hold tension . it will be easier to just replace the air condition pump or best known as the air compressor with a used one . this is my link to my garagehttps://www.facebook.com/TedsRepairs

Install new belt only on driverside of engine. 55 1/4" belt with 6 groves....slide on to water pump pulley last its kinda tight..

The easiest way to do that would be to remove the compressor and install a "compressor by-pass pulley". These are manufactured by a couple different companies to help people that cannot afford to fix their A/C but need to get their vehicle back on the road. This fix allows you to use the original belt for your vehicle without having to re-rout anything. AutoZone carries one made specifically for your vehicle. It is part #34175. List Price: $34.99

For more information on this click HERE

PART # K060551 BYPASS COMPRESSOR AND ON YOUR WAY

The car did not come without a/c so there isn't anything really available to get around your problem. If you are creative, you can make up a bracket and idler pulley to put in place of the compresor but you will need to experiment with belts to get the correct length.

If the air compressor is bad... check the diagram under the hood for the serpentine belt. Most vehicles will have a diagram that displays the serpentine belt path along with a part number for a shorter belt to bypass the ac compressor. If you can't find the diagram, go to your local parts store and they should be able to help.