All cars have a release button on the shift column for towing. Look for a little square or circle nee your shifter that you can pop the plastic piece off of. Usually you can stick a key or somethin to press the button down and put the car into any gear. I donf know if that helps you for now. You might also wanna make sure you have your foot on the brake when your tryin to put in into gear. Some. Newer carz wont lt you shift out of park unless you are pressing the brake.
SOURCE: Gear shifter will not go into park
There is a plastic actuator stick under the shift knob. Remove the "horse shoe" clip from the shift knob and remove knob by pulling strait up. You can twist it right and left a very small amount to loosen the knob, but not much.
Once you have the shift knob removed you will see the plastic actuator stick. Push down on the stick and put shift lever in park. If that works, the shift knob or stick is worn out.
Let me know.
Regard,
SOURCE: Gear shifter sticking (auto) from Park to reverse and vice versa.
you need to have the shifting cable lubricated or replaced.
SOURCE: 97 chevy truck 1500 gear shift gets stuck in park
You can remove the interlock off the gear shift or maybe spray some crc on it otherwise probably a loose wire or switch
SOURCE: 2008 Dodge Avenger Gear Shift stuck in Park
sounds like the lock for it broke either from the button on the shifter or from the pedal its only plastic i would take the shifter cover off and try it then and look at all the peices too see what is not working
SOURCE: 1999 Lincoln Town Car shifter stuck in park
Look at the swith on the brake pedal, it shoud have two green wires on it. Make sure it is not melted or the wire is broken. If it is damaged you can connect the 2 wires together to get it into gear, but this should be temporary as it bypasses the neutral safety switch.
563 views
Usually answered in minutes!
×