Just wondering wear the fuel filter is at - 2009 Kia Sportage

Check to see if plugs have fuel on them, if not check fuel filter/fuel pump. Check your cap and rotor for wear and plug wires. Check coil for spark. Check air filter. Check wiring connections for corrosion and wear. Check fuses and fusible links.

Does it start to break down gradually getting worse or just die?

fuel pump could be wearing out and/or fuel filter could be getting plugged which in turn will wear out a fuel filter. Let me know

I don't know if you have to start at a certain end. I usually loosen both line nuts then remove the rear one. Then I hold the front line nut with a wrench and unscrew the filter from the nut. Depressurizing the system can be done by depressing the valve inside the fuel pressure test port located on the fuel rail. Place a shop rag over the valve and carefully depress the needle valve inside the valve stem with a small screwdriver. do this a few times until no fuel comes out. Always wear safety glasses when performing this procedure. Always use line wrenches on the filter nuts.

Check this guido for Replace a Fuel Filter...

Parts:
1. Fuel Filter

Tools:
1. 3/8 in. Drive Ratchet
2. Hose Pincher
3. Flare Nut Wrench
4. Flat Head Screwdriver
5. Socket Set

Steps:
Step 1 Open the hood and locate the fuel filter. If the fuel filter is not in the engine compartment, follow the fuel line from the tank until the fuel filter is located.
o Tip: Safety Tip:Always wear safety glasses when working on your vehicle. Wear other personal protective equipment (PPE) when necessary, for example latex gloves or safety shoes.

Step 2 If the fuel filter has a clear case, inspect the filter element for dirt.

Step 3 If the fuel filter case is not see-through, remove it from the fuel line. Drain the fuel from the filter into a container and inspect the condition of the fuel.
o Tip: Caution: Before removing fuel lines or fuel related parts, make sure that the fuel pressure is relieved from the vehicle fuel system. To relieve the pressure in fuel injected systems, remove the fuel pump fuse and run the engine.

Step 4 Install the new fuel filter making sure that the flow is in the correct direction. The arrow on the fuel filter is the direction of flow from the tank to the engine.

Step 5 Secure the lines back onto the fuel filter. If applicable, reinstall the fuel pump fuse.

Step 6 Start the engine and check for fuel leaks.

Step 7 Test drive the vehicle to check for a rough running engine, hesitation, or lack of power.


Hope helps (remember rated this).

Direct fit OE replacement fuel filter.





How to Replace a Fuel Filter (DIY Complexity: Moderate / Time: 1.4 hours)

Parts:
1. Fuel Filter

Tools:
1. 3/8 in. Drive Ratchet
2. Hose Pincher
3. Flare Nut Wrench
4. Flat Head Screwdriver
5. Socket Set

Steps:
Step 1 Open the hood and locate the fuel filter. If the fuel filter is not in the engine compartment, follow the fuel line from the tank until the fuel filter is located.
o Tip: Safety Tip:Always wear safety glasses when working on your vehicle. Wear other personal protective equipment (PPE) when necessary, for example latex gloves or safety shoes.

Step 2 If the fuel filter has a clear case, inspect the filter element for dirt.

Step 3 If the fuel filter case is not see-through, remove it from the fuel line. Drain the fuel from the filter into a container and inspect the condition of the fuel.
o Tip: Caution: Before removing fuel lines or fuel related parts, make sure that the fuel pressure is relieved from the vehicle fuel system. To relieve the pressure in fuel injected systems, remove the fuel pump fuse and run the engine.

Step 4 Install the new fuel filter making sure that the flow is in the correct direction. The arrow on the fuel filter is the direction of flow from the tank to the engine.

Step 5 Secure the lines back onto the fuel filter. If applicable, reinstall the fuel pump fuse.

Step 6 Start the engine and check for fuel leaks.

Step 7 Test drive the vehicle to check for a rough running engine, hesitation, or lack of power.


HOpe this helped.

1994 Toyota Camry 3.0L EFI DOHC 6cyl
The Fuel Filter is located under hood, driver side, front side of strut tower, mounted on fenderwell in fuel line.

How to Replace a Fuel Filter
(DIY Complexity: Moderate / Time: 1.4 hours)

Parts:
1. Fuel Filter

Tools:
1. 3/8 in. Drive Ratchet
2. Hose Pincher
3. Flare Nut Wrench
4. Flat Head Screwdriver
5. Socket Set

Steps:
Step 1 Open the hood and locate the fuel filter. If the fuel filter is not in the engine compartment, follow the fuel line from the tank until the fuel filter is located.
o Tip: Safety Tip:Always wear safety glasses when working on your vehicle. Wear other personal protective equipment (PPE) when necessary, for example latex gloves or safety shoes.

Step 2 If the fuel filter has a clear case, inspect the filter element for dirt.

Step 3 If the fuel filter case is not see-through, remove it from the fuel line. Drain the fuel from the filter into a container and inspect the condition of the fuel.
o Tip: Caution: Before removing fuel lines or fuel related parts, make sure that the fuel pressure is relieved from the vehicle fuel system. To relieve the pressure in fuel injected systems, remove the fuel pump fuse and run the engine.

Step 4 Install the new fuel filter making sure that the flow is in the correct direction. The arrow on the fuel filter is the direction of flow from the tank to the engine.

Step 5 Secure the lines back onto the fuel filter. If applicable, reinstall the fuel pump fuse.

Step 6 Start the engine and check for fuel leaks.

Step 7 Test drive the vehicle to check for a rough running engine, hesitation, or lack of power.


Hope this help (remember rated this).

Isuzu Rodeo - How to Replace a Fuel Filter
( DIY Complexity: Moderate / Time: 1.4 hours)

Parts:
1. Fuel Filter - $8.40



Tools:
1. 3/8 in. Drive Ratchet
2. Hose Pincher
3. Flare Nut Wrench
4. Flat Head Screwdriver
5. Socket Set

Steps:
Step 1 * Open the hood and locate the fuel filter. If the fuel filter is not in the engine compartment, follow the fuel line from the tank until the fuel filter is located.
o Tip: Safety Tip:Always wear safety glasses when working on your vehicle. Wear other personal protective equipment (PPE) when necessary, for example latex gloves or safety shoes.

Step 2 * If the fuel filter has a clear case, inspect the filter element for dirt.

Step 3 * If the fuel filter case is not see-through, remove it from the fuel line. Drain the fuel from the filter into a container and inspect the condition of the fuel.
o Tip: Caution: Before removing fuel lines or fuel related parts, make sure that the fuel pressure is relieved from the vehicle fuel system. To relieve the pressure in fuel injected systems, remove the fuel pump fuse and run the engine.

Step 4 * Install the new fuel filter making sure that the flow is in the correct direction. The arrow on the fuel filter is the direction of flow from the tank to the engine.

Step 5 * Secure the lines back onto the fuel filter. If applicable, reinstall the fuel pump fuse.

Step 6 * Start the engine and check for fuel leaks.

Step 7 * Test drive the vehicle to check for a rough running engine, hesitation, or lack of power.


I really hope help with this (remember rated and comment this help).

at 48,000km
change transmission fluid
oil and filter
cabin air filter
at 72,000km
oil and filter
cabin air filter
every two years replace brake fluid
every four years replace engine coolant
providing that you have it check brakes, lines, hoses and belts for wear and tear at every service interval

How to Replace a Fuel Filter
DIY & Save up to $123.86 (Complexity: Moderate / Time: 1.4 hours)

Parts:
1. Fuel Filter - $115.14

Tools:
1. 3/8 in. Drive Ratchet - $7.55
2. Hose Pincher - $5.84
3. Flare Nut Wrench - $5.53
4. Flat Head Screwdriver - $3.14
5. Socket Set

Steps:
Step 1
Open the hood and locate the fuel filter. If the fuel filter is not in the engine compartment, follow the fuel line from the tank until the fuel filter is located.
- Tip: Safety Tip:Always wear safety glasses when working on your vehicle. Wear other personal protective equipment (PPE) when necessary, for example latex gloves or safety shoes.

Step 2
If the fuel filter has a clear case, inspect the filter element for dirt.

Step 3
If the fuel filter case is not see-through, remove it from the fuel line. Drain the fuel from the filter into a container and inspect the condition of the fuel.
- Tip: Caution: Before removing fuel lines or fuel related parts, make sure that the fuel pressure is relieved from the vehicle fuel system. To relieve the pressure in fuel injected systems, remove the fuel pump fuse and run the engine.

Step 4
Install the new fuel filter making sure that the flow is in the correct direction. The arrow on the fuel filter is the direction of flow from the tank to the engine.

Step 5
Secure the lines back onto the fuel filter. If applicable, reinstall the fuel pump fuse.

Step 6
Start the engine and check for fuel leaks.

Step 7
Test drive the vehicle to check for a rough running engine, hesitation, or lack of power.


Hope thats help (remember rated this help). Good luck.

i dont know about the turbo going bad,but i do know that ive seen 7.3 diesel have bad injectors,usually 2 at a time, check for fuel at the injector which can get messy so wear protective gear such as goggles and gloves,while running crack open the fuel line at the injector to see if there is fuel,it should run rough which is good on the working cylinders,if it doesnt change then maybe a bad injector,or not enough fuel pressure at that injector.injection pump issues are another thing,but most likely its an injector.