Cars & Trucks Logo

Related Topics:

Ivor Peltz Posted on Mar 23, 2015

How do I adjust the steering rack and pinion spring on a 2002 Honda CRV RD5

5 Related Answers

Anonymous

  • 1263 Answers
  • Posted on Apr 19, 2009

SOURCE: rack and pinion or steering kit

your vehicle has a transverse mounted engine and most newer vehicls have rack and pinion steering versus a shaft going to a gear box with a drag link and sway bar type steering system. most full size suvs have the gear box set up. some suvs like dodge durango have both a gear box and a rack and pinion. your vehicle has only the rack and pinion

Ad

Anonymous

  • 3600 Answers
  • Posted on May 29, 2009

SOURCE: No power steering assist after changing rack and pinion assembly

and?? finish the question does not have power steering now? bleed the system it has air in it and fill the P.S. pump reservoir. More info please.

mtous2162

  • 58 Answers
  • Posted on Jun 04, 2009

SOURCE: 2002 honda crv air filter change

Hi!

Can you specify if you are referring to the engine intake air filter or the cabin air filter?
If you are referencing the cabin air filter, the attached youtube video should help.

I originally created the video for the Odyssey, but found out after looking at my dad's CRV that it is essentially the same procedure as the Odyssey, and have also noticed that the same stands true for most Honda vehicles built between 2005 and 2009.

Happy motoring!

Anonymous

  • 19 Answers
  • Posted on Sep 02, 2009

SOURCE: how do i remove the rack and pinion on a 1996

there is a pinch bolt that holds it in, make sure you straighten the steering wheel first and lock it down with something so it cant move, then remove the pinch bolt and the pressure and discharge lines from the rack there are return lines within the rack that go side to side, you dont need to remove those. Make sure the replacement rack is even when putting back into steering yolk

Anonymous

  • 81 Answers
  • Posted on Oct 19, 2009

SOURCE: replacing power steering hose and rack and pinion steering

when it comes to the power steering hose I would say just do it yourself. As for the rack and pinion it will probably cost you quite a few hours of labor. anywhere from 5-9. Its up to you!

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1helpful
1answer

I was speaking with someone yesterday about my Honda CRV 2007. It's about the power steering. We added fluid,but still making moaning sound. Someone said it could an O ring on some steering pump.

If you have to keep adding fluid, you're got a leak. The leak can be at a hose fitting, a worn hose, or a leak in the rack and pinion. Get it checked out at a shop before you burn up your pump.
0helpful
1answer
0helpful
1answer

Rack and pinion removal

remove the left and right tie rod ends from the from the pivot arms , remove power steering oil lines, remove steering wheel shaft to rack pinion clamp, with wheels in straight ahead position remove rack hold down fittings, slide pinion off steering shaft and remove rack.
0helpful
1answer

Honda CRV STEEERING RACK sring adjustment

steering rack adjustment? you'll need to go to an alignment shop to dial in those outer tie rod ends to the steering knuckle

or watch various youtube videos and search forums for the backyard mechanic way
0helpful
1answer

How do I repair the Honda CRV rd5 rear wheels alignment?

Best way is take it to a shop that has a 4 wheel alignment machine and get it done right.
3helpful
1answer

Is it possible for power steering fluid to get into the engine and mix with the oil? I am loosing fluid and there are no visible leaks, the engine oil and filter was recently changed and now has turne

No, the power steering is entirely a separate and sealed system, wholly external to the engine. The power steering pump pushes the fluid through a high pressure hose into the rack and pinion-the steering gear mounted below and behind the engine-and holds pressure within the rack that enables power assisted steering. At the same end where the power steering fluid hose enters the gear will be a fitting for a return line back to the fluid reservoir. These two hoses are usually routed close together at least part of the way, some may even be held together with brackets. Leaks could develop at the pump, the fluid reservoir, or the two hoses to and from the rack and pinion, or the seals inside the rack and pinion may have failed. You should be able to find the leak-it will only leak to the outside-to check the rack and pinion for leaks, right where your tie rods come out of the gear and go to the wheels for steering, will be a small rubber boot encasing the tie rod and the end of the rack assembly-on both ends is a boot and a tie rod-peel back the rubber boot from the gear ass\'y, it should be dry. If a lot of fluid, the seals in the rack and pinion are gone. It will have to be replaced.
Hopefully you will find a leaking hose or fractured reservoir, but keep looking, air flow may be blowing the leaking fluid back and under the car. Good luck, hope it\'s not the rack and pinion.
0helpful
1answer

Steering slipping honda drv 1999

1. check rack & pinion for center wear from internal fluid leaking around the rack piston. 2. look for broken or loose Steering Stabilizer Bracket. 3. Mismatched Tires or Wheels. 4. Broken or Weak Coil Springs. 5. Badly Worn or Broken Shock/Strut. Hope this helps you solve your problem. BTW, you meant Honda CR-V right?
5helpful
1answer

How do you remove the rack and pinion from a 2002 cadillac deville. there is a rubber boot connected to the steering gear and the steering column, how do you remove this boot?

set steering whell straight. push rubber boot up there is a 12mm/7-16 bolt that connects the steering shaft to the rack and pinion removeboth fron tires remove p/s lines and all other fastners for the rack and pinion
0helpful
1answer

AN ABNORMAL SOUND ON 07 Honda CRV

There is a problem with the rack and pinion please check the fluid and if necessary drain and fill again also you can try a sying lube product to solve the problem but if this does not work check the rack and pinion.
Not finding what you are looking for?

218 views

Ask a Question

Usually answered in minutes!

Top Honda Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6988 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...