PLEASE DON'T FORGET TO RATE!
-
Remove the headlamp trim panel (grille panel) attaching screws.
-
Remove the four headlamp bulb retaining screws. These are the screws which hold the retaining ring for the bulb to the front of the car. Do not touch the two headlamp aiming screws, at the top and side of the retaining ring, or the headlamp aim will have to be readjusted.
-
Pull the bulb and ring forward and separate them. Unplug the electrical connector from the rear of the bulb.
-
Plug the new bulb into the electrical connector. Install the bulb into the retaining ring and install the ring and bulb. Install the trim panel
To remove the headlights, unfasten the retaining screws, then remove the headlight trim
Remove the 4 headlight retaining ring screws (A). Do not confuse these with the aiming screws (B)
Remove the headlight retaining ring, but make sure the headlight doesn't fall out of the assembly
Pull the headlight out of the mounting plate, unplug the electrical connector and remove the headlight
×