At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
there is a wire that runs across the bottom from one rail to the other. It has small springs that secure it. find it and be sure it is not broken. Both ends are the same. you need an E-10 socket to remove the four seat bolts.there is a wire that runs across the bottom from one rail to the other. It has small springs that secure it. find it and be sure it is not broken. Both ends are the same. you need an E-10 socket to remove the four seat bolts.
You can't post conmments that contain an email address.
Re: How to fix the driver's side fore/aft seat adjustment...
I have never found away to fix a seat adjuster. What I have had to do is go to a junk yard and buy a new seat base and intsall it. It is a pretty simple job.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
The electric motors that powered your seat to make it move in those different ways has now died so what you need to do is replace your electric motors underneath your seat and it will be working properly again
On the 90s S models there were two screws holding the rails in front and two in back. remove those bolts, disconnect the battery and then the seat belt light wiring plug and the thing should come right out.
For 1997 Saturn SL1 1.9L MFI SOHC
4cylthe Engine Control Computer is located in
seating area, driver side, behind dash, upper corner,
mounted on dash support brackets.
Hope help with this (remember comment and rated this).
If the seat is not moving forward or backward, but you do hear a click or a motorsound- chances are that you dropped in some change or other debris may be blockling the way. You might also have blown a fuse - look for fuse no. 30, which is a 30 Amp fuse.
Once you've checked all that and if the motor still does not run, then the problem may be with your wiring.
Wire colors between the switch panel and motor are:
• Fore/aft-Tan and Lt Green
• Front up/down-Dark Green and Dark Blue
• Rear up/down-Yellow and Light Blue
• Recline up/down motor's Blue and Light Green
there is a wire that runs across the bottom from one rail to the other. It has small springs that secure it. find it and be sure it is not broken. Both ends are the same. you need an E-10 socket to remove the four seat bolts.
×