Do the gauges and warning lights work with key on? If not, check fusible links, AM1 for ignition key power. If the gauges/warning lights work, the key switch has power, so you can follow it to the starter solenoid. The start wire out of the ignition switch is a black/white wire, this is the hot wire to the solenoid, and only has power when key is held in start. With automatics, there is only one switch-a neutral start switch- between the ignition switch and the solenoid on the starter .
With a manual transmission, the black-white start wire goes to both a starter relay and a clutch start switch (on the clutch pedal), those two work together to send the power on to the starter solenoid. So, no crank, good battery, power to key, follow the black/white wire, the start relay and the clutch switch, to the starter solenoid- a hot wire there turns the starter motor on.
dash light fuse and back feed through a bulb
226 views
Usually answered in minutes!
×