Froth engine mount is broken and needs replacing
Is this the one on the passenger side fenderwell? If so, you need a floorjack and a 2X4 to just raise the engine up enough to take the weight off the mount. Then remove the fasteners and change the mount
If its the lower mount on the engine cradle, It is a tough one to change on your back as the whole car has to be raised and then jack the engine up to remove the fasteners, and it isn't safe to do so with a floor jack raised to it's limits.
Don't do it your self take to a qualified mechanic
SOURCE: replacing oil pump in 95 Cutlass 3.1L
YOU WILL HAVE TO REMOVE THE EXHAUST PIPE IN THE REAR.IT HITS THE FLOOR PAN.ALSO REMOVE THE TWO DOG BONE MOUNTS ON TOP IF THIS ONE HAS THEM
SOURCE: '88 cutless 3.8 6cyl. To replace starter remove
You don't have to remove anything but the starter assembly, starter will come out from under the car, flag labor time to do this job is .8 of an hrs.
93 views
Usually answered in minutes!
×