2005 Pontiac Vibe Logo
b
bobb Posted on Mar 15, 2015

How to fix codeP2401 - 2005 Pontiac Vibe

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

Engine idle very lumpy and wanting to stall on gear down shift. Sometimes poor on starting until fuel gets through then car runs well but very smelly.

SYMPTOM 1: ROUGH IDLE IN THE COLD

The engine will not idle smoothly, or it stalls during idle when the engine is cold. When the engine is cold and you take your foot off the gas pedal, the engine runs very rough and may even stall. When you run the engine at higher speeds, it seems to run fine, or at least it runs more smoothly.
Possible causes:
  1. If you have a carburetor, you may have a bad accelerator pump or power circuit.
    The Fix: Replace accelerator pump or replace the carburetor.
  2. There may be a vacuum leak.
    The Fix: Check and replace the vacuum lines as required.
  3. There may be some type of ignition problem.
    The Fix: Check and replace the distributor cap, rotor, ignition wires, and spark plugs.
  4. The ignition timing may be set wrong.
    The Fix: Adjust the ignition timing.
  5. There may be a fault in the computerized engine control system.
    The Fix: Check engine control systems with a scan tool. Test the circuits and repair or replace components as required.
  1. The EGR valve may be bad.
    The Fix: Replace the EGR valve.
  2. The engine may have mechanical problems.
    The Fix: Check the compression to determine the engine's condition.
  3. Idle speed is set incorrectly.
    The Fix: Set idle speed to the car's original settings.
  4. The fuel injectors may be dirty.
    The Fix: Clean or replace the fuel injectors.

SYMPTOM 2: ROUGH IDLE WITH WARM ENGINE

The engine will not idle smoothly, or it stalls during idle when the engine is warm. When the engine is warm or hot and you take your foot off the gas pedal, the engine runs very rough and may even stall. When you run the engine at higher speeds, it seems to run fine.
Possible causes:
  1. If you have a carburetor, you may have a bad accelerator pump or power circuit.
    The Fix: Replace accelerator pump or replace the carburetor.
  2. There may be a vacuum leak.
    The Fix: Check and replace vacuum lines as required.
  3. The fuel pressure regulator may be operating at too low a pressure.
    The Fix: Check the fuel pressure with a fuel pressure gauge. Replace fuel pressure regulator. (This is not really a do-it-yourself kind of job.)
  4. Idle speed set incorrectly.
    The Fix: Set idle speed to specs.
  5. There may be some type of ignition problem.
    The Fix: Check and replace distributor cap, rotor, ignition wires and spark plugs.
  6. There may be a fault in the computerized engine control system.
    The Fix: Check engine control systems with a scan tool. Test circuits and repair or replace components as required. (This is not really a do-it-yourself kind of job.)
  7. The EGR valve may be bad.
    The Fix: Replace EGR valve.
  1. The engine may have mechanical problems.
    The Fix: Check compression to determine engine condition.
  2. The fuel injectors may be dirty.
    The Fix: Clean or replace fuel injectors.

SYMPTOM 3: FAST IDLING

The engine idles too fast. After the engine has run long enough to become warm, the idle speed does not come down to normal. You really notice it when you come to a stop and must have to push ******* the brake pedal to keep the car from moving.
Possible causes:
  1. If you have a carburetor, you may have a bad accelerator pump or power circuit.
    The Fix: Replace the accelerator pump or replace the carburetor.
  2. The engine may be overheating.
    The Fix: Check and repair the cooling system.
  3. The fuel pressure regulator may be operating at too low a pressure.
    The Fix: Check fuel pressure with a fuel pressure gauge. Replace fuel pressure regulator. (This is not really a do-it-yourself kind of job.)
  1. The ignition timing may be set wrong.
    The Fix: Adjust the ignition timing.
  2. There may be some type of ignition problem.
    The Fix: Check and replace the distributor cap, rotor, ignition wires and spark plugs.
  3. There may be a fault in the computerized engine control system.
    The Fix: Check the engine control systems with a scan tool. Test the circuits and repair or replace the components as required.
  4. There may be a vacuum leak.
    The Fix: Check and replace vacuum lines as required.
  5. You have a bad idle speed control unit.
    The Fix: Replace the idle speed control unit.
  6. The alternator may not be working properly.
    The Fix: Replace the alternator.

SYMPTOM 4: STALLING UPON STOPPING

Car stalls when stopped quickly. You are driving along and everything is just fine ... until you let off the gas pedal and apply the brakes. The engine starts shaking and may even stall. Not a good thing to happen because you lose power steering when the engine dies and could risk an accident.
Possible causes:
  1. There may be a serious vacuum leak.
    The Fix: Check and replace the vacuum lines as required.
  2. There may be a fault in the computerized engine control system.
    The Fix: Check the engine control systems with a scan tool. Test the circuits and repair or replace the components as required. (This is not really a do-it-yourself kind of job.)
  3. Broken linkage.
    The Fix: Repair or replace the linkage as required.
Idling issues can be very frustrating, but with some patient troubleshooting, you'll have a real chance at figuring it out. Remember to always check your engine idle with the air conditioning and defroster turned off, as both of these systems are designed to change the idle when they are on due to the air conditioning system's demands on the engine.
1helpful
3answers

What is the fix

The fix is typically not the problem but the opposite
0helpful
3answers
0helpful
1answer

What causes a pulley on a serpentine belt to stop turning and how can I fix the issue?

The bearings on the idler or tensioner pulley have given up. No cheap fix here. You should fix it now or be prepared to fix a few more things later.
0helpful
3answers

My fix engine light is on and where do i need to go to fix it

To turn off the fix enine light the problem must be fixed. A dealer or a reputable service should be able to find and fix the problem. You can try and remove your negative battery for five minutes, then reconnecting. If the code was intermittent it will not come back. If it is a hard fault, meaning a definite bad component the light will come back on. In this case it needs to be fixed.
0helpful
1answer

I got same problem on my 99 chrysler concorde.

i havent fixed this problem yet,i have different people tell me its the fuel pump,thermostat,sensor,waterpump..but i cant just fix all this things ,i dont have that much money to be fixing things that dont need to be fixed...
0helpful
1answer

Taillights wont work

Replace the "looks fine" bulbs first (cheap fix), then replace the fuses (also cheap fix), if that doesn't fix the problem it could be wiring (may NOT be cheap fix!)....

:0)
0helpful
1answer

Codes

RF2560 -  Remote Keyless Entry Validation fault - dealer fix RS0061 -  Right front position sensor fault - dealer fix IP1552 - KAM error (keep alive memory) power loss to instrument panel? - dealer fix IP2419 - instrument panel (unsure) 
I would talk with a dealer re fixes to all these codes. Unless you're a great mechanic and understand advnanced principles of electronics, let the experts fix your expensive (or to fix at least) car.
Sorry not to have better news. Community colleges offer cheap classes in auto repair...
Paul
Not finding what you are looking for?

329 views

Ask a Question

Usually answered in minutes!

Top Pontiac Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6988 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a Pontiac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...