How do I link my phone to steering wheel - X3 Series BMW Cars & Trucks

It is a known issue. There are videos in the link

https://www.google.com/search?q=tighten+the+steering+wheel+in+my+1997+f150

..

Check this link out, they have instructions on how to set/reset steering wheel controls: my.gmc.com > learnAbout > steering-wheel-controls > AcadiaSteering Wheel Controls - GMC Owner Center I hope it helps!

You will need a steering wheel puller. You can borrow one from most auto parts stores. You will need to remove the horn airbag center to expose the bolt. Loosen the main steering wheel bolt till it's almost off then attach the puller. Keep tightening the puller till the steering wheel comes free.

hi Justine.
There some moments when the steering wheelbecomes stiff and hard to turn. From irregular servicing, lack of fluid oil to low tyre pressure or bad wheelalignment, any of these could be the cause. ... Under normal circumstances when the car is in good condition, the steering wheel is always flexible when turning.11 Sep 2014

What makes the steering wheel stiff? - Daily Monitor

www.monitor.co.ug/Business/Auto/What-makes-the-steering-wheel-stiff-/.../index.html
try this link.
Why Is My Steering Wheel Hard To Turn
or this.
3 Common Causes of Steering Wheel Hard to Turn Especially at Low Speeds...
or this one.
What causes steering wheel hard to turn

Hi Dale, The link below is a youtube page showing how to remove a steering wheel.... Just click any link on the page, I hope this helps.... CHEERS..
remove the steering wheel off mitsubishi canter YouTube

Year/make/model??? If the steering wheel turns but both front wheels don't, suspect internal rack and pinion/steering box failure or broken steering shaft u-joint or possible broken steering linkage. ( Pitman arm/ center link etc)

Hi Dennis,here's a link showing you how to remove your steering wheel,if you want,join the site,it's free,then you can use their repair guides like me. Repair Guides Steering Steering Wheel AutoZone com

with engine off, have someone turn the steering wheel back and forth. Check under the hood along the steering shaft for loose u-joints. check the steering box, check joints at either end of drag link(from steering box down to passenter wheel) and tie rod ends. do this with engine off so wheels dont turn. and by the way, jeeps have sloppy steering boxes from the factory, so don't expect excellent, tight steering when you're done. good luck

check the idler arm on the steering drag link

If your steering wheel is off center, this can cause the problem. Luckily this is very easy to fix -- you can do so even if you have little to no experience working on your vehicle.
1. Park the vehicle with the wheels facing straight ahead (drift forward until you are moving in a straight line). Don't worry about the steering wheel position. 2. Locate the steering drag link -- the diagonal rod coming from the bottom of the steering arm to the top of the passenger side steering knuckle (on the axle near the tire) 3. Loosen the two bolts on the rotating adjustment collar on this link. I believe these are 13mm. 4. Rotate the collar one way about two or three turns, check the steering wheel to ensure that the "Jeep" logo is perfectly horizontal. If it's not, continue rotating the collar (or move it in the opposite direction) until the wheel is centered. 5. Tighten down the nuts on the drag link adjuster. 6. Take her for a test drive and let me know how it worked!