I dont know what colors are the speaker wires on a factory stereo
SOURCE: how do i remove the front and rear door panels on
First unlock the door. look at the door lock, you can see a little tab like that you can pull out. Do this and pull the door lock cap off. Next, behind the door handle is a cover you just pull off buy putting that flat edge of a butter or something behind it and pulling out. It is only held in with velcrow. Next, take out the screw behind that plate. Now all you have to do is run along the bottom of the door and pull it straight out until it is loose. Then pick the door straight up and off.
SOURCE: hooking up a new stereo
Go by a stereo shop and get an adapter for your car. It connects all of the correct wires to the aftermarket radio without damaging or removing wires from old connector.
SOURCE: i dont know what colors to hook up from my car to
i used this site when i installed in my regal, its a great asset
http://www.installdr.com/QuickWiring.html
SOURCE: i need the color codes for a 1993 Cadillac Seville
This should cover it but there are several different plug types so was unable to give you the right one for that and also what type of factory radio made a difference as far as the plug was concerned but the wire colors should be correct. Constant 12V+ = Orange Switched 12V+ =
Yellow Illumination =
Gray Ground =
Black Dimmer =
Brown Antenna Trigger =
Pink Left Front (+) = Tan Left Front (-) = Gray Right Front (+) = Light Green Right Front (-) = Dark Green Left Rear (+) = Brown Left Rear (-) = Yellow Right Rear (+) =
Dark Blue Right Rear (-) = Light Blue
SOURCE: cant get sound out of stock speakers with aftermarket stereo do i have to bypass factory amp
You need a special jumper, you should be able to buy it from a company called Crutchfield.com
49 views
Usually answered in minutes!
×