Question about 2006 Land Rover Range Rover Sport

Open Question

HOW TO RESET IGNITION IMMOBILISER ON 06 RANGE ROVER SPORT HAZARD LIGHTS FLASHING ENGINE WANT KICK OVER

I TRIED A SCAN TOOL

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad
  • 510 Answers

SOURCE: How do you reset the service mileage light on a

e mail barrycorrin@manx.net for download

Posted on Mar 27, 2009

Ad
  • 129 Answers

SOURCE: how i reset the service engine light on a 2004

There are hidden cheats (just like a video game)
this is cool try it out.
1. ignition off
2.Press and hold trip meter button(left black button) down and turn igniton kry to first position. Keep the button pressed about 5 seconds until the words Oil Service or Inspection reset appears on LCD display.
3. Release the button then press and hold till reset begins to flash
while the display is flashing let go then press again.
the display will read END SIA and your all done.

In practice you have to make the inputs quickly, do not delay as you will have to start over

Posted on Dec 20, 2009

  • 1 Answer

SOURCE: 2004 Range rover Check Engine Light

The Range Rover actually has 4 oxygen sensors - 2 in front of the Cat and 2 behind the cat - try to check / replace the other 2

Posted on Dec 31, 2009

  • 3600 Answers

SOURCE: How do you fit an 06 Range Rover door mirror?

Is there three plastic caps about where the bolts re or does it have the little plastic trinagle cover over the corner of the mirror?

Posted on Jan 22, 2010

  • 9 Answers

SOURCE: HOW DO YOU RESET SERVICE LIGHT ON A 2006 RANGE

reset service light. The SIA information is stored in the instrument cluster EEPROM and can only be reset by using T4. (Dealer tool)

Posted on Feb 25, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I get into program mode on my 2002 S-10 Blazer? Have tried the instructions and it will not cycle to open and lock when you release the unlock button.


Transmitter Programming
Important: All transmitters which are to be recognized by the remote control door lock receiver (RCDLR) must be programmed in a single programming sequence. If the system is placed in program mode it will erase all previously programmed transmitters upon the receipt of the programming signal from the first transmitter. Up to 4 transmitters can be programmed. Do not operate or program the transmitters in the vicinity of other vehicles that are in the keyless entry program mode. This prevents the programming of the transmitters to the incorrect vehicle.
Install a scan tool.
Use the scan tool in order to access programming: Vehicle Control System/Computer Integrating System/Module Setup/BCM/Program Key Fobs.
Press the START soft key on the scan tool.
Important: The scan tool must stay connected until all of the transmitters are programmed.
Press and hold the LOCK button and the UNLOCK button simultaneously on one transmitter. After a delay of 5-10 seconds, the scan tool will indicate that the transmitter is programmed.
Repeat the previous step in order to program up to 4 transmitters.
Remove the scan tool.
Operate the transmitter functions in order to verify correct system operation.

Nov 09, 2017 | Chevrolet S 10 Cars & Trucks

1 Answer

Heater controls stop working and rear defrost inop and the park assit not working and we tried to program a keyless entry remote that didnt work eathier tried that and everything stop working


Did you check fuse's in fuse block center console ? Fuse #26 IGN3 / HVAC 10amp . Do you know what I'm talking about ?
Fuse Block - Center Console
Inside of console, behind the right console access panel
What did you do jump terminals in the DLC ?
You need a factory scan tool to program keyless entry remote .
  1. Install a scan tool.
  2. Use the scan tool in order to access programming: Vehicle Control System/Computer Integrating System/Module Setup/BCM/Program Key Fobs.
  3. Press the START soft key on the scan tool.
  4. Important: The scan tool must stay connected until all of the transmitters are programmed.
  5. Press and hold the LOCK button and the UNLOCK button simultaneously on one transmitter. After a delay of 5-10 seconds, the scan tool will indicate that the transmitter is programmed.
  6. Repeat the previous step in order to program up to 4 transmitters.
  7. Remove the scan tool.
  8. Operate the transmitter functions in order to verify correct system operation.

Oct 09, 2016 | 2004 Buick Rendezvous

1 Answer

Do you have a picture of someone hooking a scan tool up in a 2004 chrysler seabring


youtube hooking a scan tool up in a 2004 chrysler sebring

Highlite the preceeding phrase, hold down the CTRL key, press C
Log on to Google
hold down the CTRL key, press V
You'll be dazzled with all the info available.
or,
click on this link which is what you should get if you tried that other stuff.
https://www.google.ca/#q=youtube+hooking+a+scan+tool+up+in+a+2004+chrysler+sebring

Nov 25, 2015 | Chrysler Cars & Trucks

1 Answer

ABS light is on but scan tool does not pick up an error code


Is it a code reader or a scan tool ,there is a difference ! An some will just read OBD codes from engine control module . You need to take it to someone who's scan tool can check all modules on the vehicle . Then again in some situations the factory scan tool will only work ! Everything You Need to Know About Scan Tools with John Anello

Sep 01, 2015 | Cars & Trucks

1 Answer

2000 buick lesabre leveling compressor won't turn on I took off n hooked to battery and works that way I checked all relays and fuses and there good


This is the way you start diagnosing this system !
Automatic Level Control Diagnostic System Check
Install a scan tool. Does the scan tool power up?
Go to Step 2
Go to Scan Tool Does Not Power Up in Data Link Communications

2
  1. Turn ON the ignition, with the engine OFF.
  2. Attempt to establish communication with the Rear Integrated Module (RIM).
Does the scan tool communicate with the RIM?
Go to Step 3
Go to Scan Tool Does Not Communicate with Class 2 Device in Data Link Communications
Select the automatic level control display DTC function on the scan tool.
Does the scan tool display any DTCs?
Go to Step 4
Go to Symptoms

4
Does the scan tool display any DTCs which begin with a "U"?
Go to Scan Tool Does Not Communicate with Class 2 Device in Data Link Connector Diagnosis
Go to Step 5

5

Does the scan tool display DTC B1007 or B1009?
Go to Diagnostic Trouble Code (DTC) List/Type in Body Control System
Go to Step 6

6

Does the scan tool display DTC B1327?
Go to Diagnostic Trouble Code (DTC) List/Type in Engine Electrical
Go to Diagnostic Trouble Code (DTC) List/Type
This is one you should take to a ASE certified repair facility , there are electronic modules involved you have no idea about !

May 16, 2015 | 2000 Buick LeSabre

1 Answer

99 Taurus drive cycle without scan tool


Technical problem that needs manufacture.

Jul 14, 2017 | 1999 Ford Taurus

3 Answers

I have a 2002 Chevy Venture and am having problems with the ignition. Our master was damaged so we got a new pk3 transponder key cut and tried to program it but it still won't work. We did the turn it...


You do not have another master ? If not you need a factory scan tool Dealer or mobile lock smith .
Connect a scan tool to the vehicle.
Turn ON the ignition, with the engine OFF.
Insure that all power consuming devices are turned OFF on the vehicle.
With a scan tool, select Request Info. under Service Programming System and follow the scan tool on-screen instructions.
Disconnect the scan tool from the vehicle and connect the scan tool to a Techline Terminal with the current Service Programming System (SPS) software.
On the Techline Terminal, select Service Programming System and follow the Techline Terminal on-screen instructions.
Disconnect the scan tool from the Techline Terminal and re-connect the scan tool to the vehicle.
With a master passkey III key, turn ON the ignition with the engine OFF.
With a scan tool, select Program ECU under Service Programming System.
At this point the scan tool must remain connected for the duration of the 10-minute relearn procedure.
Important: On some vehicles the SECURITY telltale maybe illuminated on steady for the duration of the 10-minute relearn procedure.
Observe the scan tool, after approximately 10 minutes the scan tool will display "Programming Successful, Turn OFF Ignition". The vehicle is now ready to relearn the key information and/or the passwords on the next ignition switch transition from OFF to ON.
Turn OFF the ignition and wait 5 seconds.
With a master Passkey III key, start the vehicle. The theft deterrent control module has now learned the key transponder information and the PCM has now learned the fuel continue password.
Important: Perform this step ONLY on vehicles with EXPORT and Canadian configured theft deterrent control modules.
Turn OFF the ignition and wait 15 seconds minimum.
Important: Perform this step ONLY on vehicles with EXPORT and Canadian configured theft deterrent control modules.
With a second master passkey III key, start the vehicle. The theft deterrent control module has now learned the second master Passkey III key transponder information
With a scan tool, clear any DTCs.

Nov 20, 2017 | Chevrolet Venture Cars & Trucks

1 Answer

How do i bleed my brakes on a 2007 GMC Yukon with the stabilitrak i've tried and got no where do i need a scan tool


no scan tool needed
Just start at the furthest wheel away from the Master Cylinder and bleed each on until your up to the master
Then bleed the ABS system last

Jan 01, 2011 | GMC Yukon Cars & Trucks

1 Answer

Code 1345 came up. I already replaced wires, plugs, cam, crank sensors.


have you tried setting the cam sync.its basically setting the timing but without a timing light.you need a scan tool to do it.rev engine and hold at 1000 rpm.read the cam sync on the scan tool.should be 0 degrees.if not loosen distributor bolt and turn distributor till cam sync reads 0.also you may have a worn distributor.

Nov 25, 2010 | 1998 Chevrolet K1500

2 Answers

2001 sentra no communication with scan tool


Take a few minutes to make sure you dont have a blown fuse....Run through them with your test light...

Nov 17, 2009 | 2001 Nissan Sentra

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

1,968 people viewed this question

Ask a Question

Usually answered in minutes!

Top Land Rover Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22484 Answers

Marvin
Marvin

Level 3 Expert

85111 Answers

Jonah Oneal

Level 3 Expert

14092 Answers

Are you a Land Rover Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...