How do I replace the flasher relay on my jeep wrangler

Question edited for clarity and some sentences.
Question moved to Jeep sub category.

The way to fix that is to go to a local auto-electrician and they will just replace the contacts in the junction box by crimping a new one to the wire, and locking it back into the junction box.

You might even be able to do it yourself by bending the contacts in the socket a little with a thin blade screwdriver.

If it's just the left front not working, think you may have a bad socket, possibly no power. Use a test light to check socket, if no power, check wires before socket.

jeep cherkee fuse panel is on thr right hand side front of engine bay that is near the battery good luck alan from dardanup w australia

yes, there is a 20 amp fuse (#7) in the engine compartment relay box.

Verify by turning on the 4 way flasher & turn signals you have the right units, you will feel them click if you touch them. If they are indeed the right ones (sometimes relays are mistaken for flasher units) they can be wiggled & pulled straight out. The spade terminals that hold them in are metal & go into another metal terminal. Sometimes they fight you if they have never been changed.

nothing serious just check the bulbs

Fuse, relay or turn signal switch.

remove shroud around signal and wiper switch,and it is between them

I have a 1997 jeep wrangler with the same problem and it started when I replaced the stock radio,with an after market one. The dash/parking lights are grounded to the stock radio,so if you can find a good body ground that should fix your problem. good luck.

Hi there,

Both the hazard and the blinker flashers are located on the fuse panel. They pull straight out.

When both turn signals fail, the cause may be a blown fuse, a faulty flasher, a broken turn signal switch or a bad connection.

When you try the turn signals, do they light up and not blink?
-If so, probably the flasher unit.

When you try the turn signals, does nothing happen?
-Check the fuse

Let me know if the problem continues after replacing the flasher.

Mike