- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Hi,Richard.
I'm don't known what's transfer caes
But, if you means transmission, sometimes when taking something out of levels,it will ties to others areas due weight
I'm don't know are you doing,if any heavy things use lifter and wiggle it.
(It a very basic idea ).
Apr 25, 2013 - 2004 Mitsubishi Endeavor Key Fob Remote Programming Instructions ... you might have visit us at Keylessentryremotefob.com You can also ...
? 2:04
www.youtube.com/watch?v=yeQRdre7O0Q
Oct 31, 2014 - Uploaded by Keyless Entry Remote Inc
... will show you How To Replace Mitsubishi Endeavor Key Fob Battery 2004 2005 To Order This Remote ...
Your best bet is to get a hold of the wiring schematic and see what items control the on/off cycle of your lights. If there is a relay involved and it goes bad, it might just stay in the closed position and leave lights on to drain battery while car is not in operation. Will be somewhere in the ignition circuit and it should get turned off when you remove the key.
might be a fuel issue. try this. turn the key like you are going to start the car and you should hear the fuel pump. but don't turn it so far the engine starter turns. then turn it off. then repeat. do this 3 times and then try starting the car. what this does is builds up fuel pressure easier. if it works then you might have a fuel leak or a fuel filter might be clogged or the fuel pump is going.
I have a 2008 Mitsubishi Endeavor. My son put coins on the lighter and after he put them inside i couldn't use it anymore. I don't know where is the fuse panel at?
I had the same problem too..My battery was stone dead..My lights were on but their probably isnt enough cranking amps to start the truck...I would take the battery out and charge it overnight and then try to crank it in the morning...i just changed the battery and the truck started right up
×