WHY DO THE PASSANGWER WINDOWS ONLY WORK WITH DRIVERS SWITCH

Hi
it happen with me also actually the problem is the power window get jammed from the inner part..... you if you able to open it just open now clean it well then spray the lube into it and for a long time it work properly..... thankyou

Do the individual door switches work their windows? If so, it would be the driver's side door switch, the master switch, that is bad.
The fact that one window works off the driver switch means that power for the windows is at least getting to the master switch, and that the ground for all power windows is good. If the other door switches work, it is just the master switch, not a wiring problem.

most of the time driver side windows switch be the first switch to wear out.try removing window switch work switch while moving the wires see if window try to go up, if yes, window switch broken.if switch not broken check see if power going to window motor when you work the switch you need a test light or digital volt meter to check to see if power going to power window motor.if power going to power window motor, either window binding or power window motor faulty. make sure driver side window master switch not locked out.if no make sure all the other power windows work if not you have blowed fuse.

The relay operates all the windows. The drivers door switch is the master and has to be connected for the rest to work. It sounds like you have a bad motor or a bad connection on the motor in the drivers door.

if the window works,it not the regulator, wires missplaced on drivers side switch

If you need further help, I’m available over the phone at https://www.6ya.com/expert/mike_9693b5ad75773352

sounds like the driver`s window switch is the problem as the passenger driver`s door switch supplies power to the passenger window motor through the passenger switch,even when controlled by the driver`s door switch

Hi! You may want to start spraying contact cleaners on the control switches. If these switches are seldomly used this issues happens. Try it and see how it goes. Hope this helps and thank you for using FixYa!

driver side window motor gone check for continuity at connector before replaceing motor

The driver side window switch is the master switch, the power or input to either roll the window up or down goes thru that switch. Double check all the connections on the back of the driver side window switch are good. With a DVOM you can also check to see if 12v are even getting to the master switch in the first place. If you aren't even getting power to the main power window switch you could've blown the power window fuse.

Replace the Driver side window switch. These have a corrosion issue.