Go to a local Autozone, Advance autoparts, or Oreilys and get a free scan. This should indicate the problem.
SOURCE: 1999 Ford Expedition Interior overhead lights stay on, door locks
locate the relay for the interior lights and doorlocks and replace it.
Robert
SOURCE: Why does my overdrive light flash while i drive. I have a 1999 Ford Explorer.
It means the transmission has seen a fault and there will be a code set for
the fault. Get the trouble codes read at an auto parts store such as AutoZone where they usually do it free and post the code if you can. It can reset its self
every time you turn the vehicle off but it will not fix the problem. Could be a minor or a major problem so you don't know till the codes are read.
Benjamin
SOURCE: What would cause my 4x4 light to stay on yet not
stuck 4x4 sensor?? just disconnect the wire. you will get the picture mate..
SOURCE: 2003 ford expedition... shaking when driving and
will try to help.the shaking during braking may be a warped brake rotor,shaking while driving is in the wheel alignment. you have several issues to deal with.as far as the engine light flashing,check all your fluid levels in the engine. oil,low coolant, brake fluid,transmission fluid. top off fluids as needed. you can reset that engine light by disconnecting the positive cable from the battery for 10mins.this will reset the cars computer. but if you have a sensor or other issues,that light will come back on.the only way to know for sure is to have it code read a garage or dealership will be able to plug it in to get the codes for you.hope this helps and thank you for choosing fixya.com
SOURCE: The 4WD will not disengage on my 1999 ford expedition
hey well i have similar problem on my 2000 awd, it seems to get stuck on 4 all the time. when i turn it grinds and thumps like heck. anybody knows how to go about this prob?
86 views
Usually answered in minutes!
×