Firing order on 2008 bmw m6 v10 - BMW Cars & Trucks

Hi Mary,here's a link to your firing order. Specifications Firing Order AutoZone com

please state if its a auto or a manual ,need this information to tell you what to check but firstly check the front pulley and the rubber join in the middle take the fan belt off to do this

Here is one source..
http://www.books4cars.com/listings.php?findmake=BMW&model=M6 &year=3000&type=%

You might like this
http://www.m5board.com/vbulletin/e63-bmw-m6-forum-bmw-m6-convertible-m6board-com/134060-m6-coupe-w-6spd-manual-owners-here.html

the most common oil leak on the m5 and m6 is the vanos high pressure line located on the front of the engine in fact this is the only area in which i have seen a leak on this car in the shop

m6 cigarrete lighter fuse is located under the mat and can find the guide to which their as well. its fuse number 22IIRC.

4.2L V6: Firing Order: 1-4-2-5-3-6 Diagram: http://autorepair.about.com/library/firing_orders/bl-fo-3841.htm
4.6L V8: Firing Order: 1-3-7-2-6-5-4-8 Diagram: http://autorepair.about.com/library/firing_orders/bl-fo-3843.htm
5.4L V8: Firing Order: 1-3-7-2-6-5-4-8 Diagram: http://autorepair.about.com/library/firing_orders/bl-fo-3844.htm
6.8L V10: Firing Order: 1-6-5-10-2-7-3-8-4-9 Diagram: http://autorepair.about.com/library/firing_orders/bl-fo-3849.htm
Hope this helps!

For the 1998 Ford Econoline Van:
I do not know if you have the Econoline E150, E250, E350 Model; or the 4.2L V6, 4.6L V8, 5.4L V8, or the 6.8L V10 Engine; however I have included all below.

For the 4.2L V6:
Firing Order:
1-4-2-5-3-6
Cylinders:
......(back)......
|..3..|.......|..6..|
|..2..|.......|..5..|
|..1..|.......|..4..|
......(front)

For the 4.6L V8:
Firing Order:
1-3-7-2-6-5-4-8
Cylinders:
Click on the following direct free Link:
http://autorepair.about.com/library/firing_orders/bl-fo-4591.htm

For the 5.4L V8:
Firing Order:
1-3-7-2-6-5-4-8
Cylinders:
.........(back).........
|...4...|........|...8...|
|...3...|........|...7...|
|...2...|........|...6...|
|...1...|........|...5...|
.........(front)

For the 6.8L V10:
Firing Order:
1-6-5-10-2-7-3-8-4-9
Cylinders:
............(back)...........
|....5....|.........|...10....|
|....4....|.........|....9.....|
|....3....|.........|....8.....|
|....2....|.........|....7.....|
|....1....|.........|....6.....|
...........(front)

Let me know if this helped, or if you have additional information questions. Feel Free to contact me at FixYa.com!

Firing order for the 4.3 Throttle Body Injected motor which is likely what you have 1-6-5-4-3-2 ------- Distributor rotates clockwise

will rsearch this at work for you and will get back after weekend

If it is posi rear-end or limited slip MUST have additive added to fluid or will cause noises.