You must remove the dash control to access the bulb.
SOURCE: 2003 toyota camery
The control panel is held in by 4 clips, one at each corner. You need a long, flat tool, preferably hard nylon, insert it at the bottom corners & pry backwards, ther clips will release, and you then pull the top towards you to release the 2 top clips. The bulbs are on the back of the control assembly. Don't use a screwdriver, it will damage the material around the panel.
SOURCE: replace fans behind dash vents on 2006 tacoma
there should be only one fan and its under the hood on the passenger side firewall. it takes about 30 minutes to change and its the only motor you will see of that side,its held in by three screws and a plug.
SOURCE: 2006 tacoma prerunner sr5, fan speed light out on dial,how to fix
if the switch still works then you will have to replace the switch. You are talking about the light on the button right?
SOURCE: 2003 parking bulb toyota tacoma
OK, I just fixed mine. The unit pulls out. You have to get a screwdiriver, wrap it with a cloth so it doesn't scratch the paint, then gently wedge the entire unit out. When it pops out, you'll see the clips that keep it in place. You might think its breaking when you pull it out, but trust me this is how you do. Just be gentle with it. After you get the unit out, simply take the socket out and replace the bulb. I did it in five minutes.
SOURCE: How do I replace the bulb behind the fan speed switch on my 2003 Tacona?
It must be very hard to do because I've known people to replace the whole switch.
Hope this helps.
174 views
Usually answered in minutes!
There are three screws that you have to take out. When you get them out you have to pull the whole unit out of the dash and pull apart the back of the unit which does have about 4 tabs then you can just unscrew the bulbs and replace
×