2000 Kia Sephia Logo

Related Topics:

Chell Smith
Chell Smith Posted on Feb 24, 2015
Be the first to answer

Having trouble getting the bolt on the power steering pump loose on my kia sephia 2000, what can i do?

Changing the outer pressure hose for the power steering

Answer This Question

4 Related Answers

Anonymous

  • 9 Answers
  • Posted on Apr 28, 2009

SOURCE: I need to rplace tke power steering hose on a 2000 kia sephia

we tried fixing the old power steering hose, finally just had it taken off and another made up by an auto shop, cost $65 to have one made. very easy to fix, just undo at each end. this is a pressure hose though so make sure and get the same kind made.

Ad

Anonymous

  • 1 Answer
  • Posted on May 15, 2009

SOURCE: Power Steering Pressure Hose

Simple. Remove bolt from pump. Remove 2 10mm bolts that anchor it to the frame. Then disconnect it where the 2 hoses meet just behind the alternator. Takes less than 3 minutes without air tools.

Anonymous

  • 89 Answers
  • Posted on Dec 31, 2009

SOURCE: power steering hose was leaking on my 1999 Kia

The first thing I would do is check the power steering fluid and make sure it is full. If the power steering fluid was low after they replaced the line, it is possible that there is air in the system in the form of tiny air bubbles. This will take some time to go away as the air bubbles migrate to the top. If the fluid level is okay and the noise does not go away in a few days, take it back to who replaced the line and have them re-check everything to make sure the line does not have a pinch in it.

Anonymous

  • 87 Answers
  • Posted on Jul 20, 2010

SOURCE: 2001 kia sephia power steering system , is the

yes there are a few different lines to the power steering system

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

How to change a power steering belt on a 2000 kia sephia
Loosen the vertical bolt on the tension bracket by turning left, then slide belt off pulleys when you have enough slack, use a tension guage to reinstall and tighten to proper tension.
Read full answer
Feb 23, 2015 • 2000 Kia Sephia
0helpful
1answer

How do I replace the serpentine belt on a 1999 Kia Sephia?
1.8L Engine
  1. Using a belt tension gauge, measure the drive belt tension and compare with the following specifications:
    1. Alternator belt (new): 86-103 lbs. (383-461 N)
    2. Alternator belt (used): 68-86 lbs. (304-383 N)
    3. A/C compressor and power steering pump belt (new): 110-132 lbs (491-589 N)
    4. A/C compressor and power steering pump belt (used): 95-110 lbs. (422-491 N)

      zjlimited_1999.jpg
      Fig. Using a tension gauge to measure the alternator belt tension - 1.8L engines (click HERE for zoom)


  2. Using the deflection method, apply moderate pressure (about 22 lbs) halfway between the pulleys, and compare with the following specifications.
    1. Alternator belt (new): 0.31-0.35 in. (8-9mm)
      2. Alternator belt (used): 0.35-0.39 in. (9-10mm)
    2. A/C compressor and power steering pump belt (new): 0.31-0.35 in. (8-9mm)
    3. A/C compressor and power steering pump belt (used): 0.35-0.39 in. (9-10mm)
  3. If the specifications fall outside the ranges given, adjust the belt as follows:
    1. Loosen the alternator mounting bolt and adjusting bolt.
    2. Adjust the alternator to get the specified belt deflection.
    3. Tighten the bolts, then recheck the tension.

      zjlimited_2000.jpg
      Fig. Adjusting the alternator belt-1.8L engines

Hope helps.
Read full answer
Oct 09, 2011 • 1999 Kia Sephia
1helpful
1answer

Is it very difficult to change the power steering pump in a 2004 kia sedona?
  1. Remove the Power Steering belt.
  2. Disconnect the power steering hoses from the power steering pump. Take caution as there may be some pressure.
  3. Remove the bolts holding the Power Steering pump to the pump mount.
  4. Install the new Power Steering pump.
  5. Reconnect the power steering hoses.
  6. Reconnect the Power Steering belt.
  7. Top off with fluid.
  8. Start up the vehicle.
  9. Turn the wheel to the left.
  10. Top off with fluid.
  11. Turn the wheel all the way to the right.
  12. Top off with fluid.
  13. Repeat the last 4 steps until the fluid level doesn't change much, and is topped off.


I’m happy to help further over the phone at https://www.6ya.com/expert/jeremy_69f3cc28d95bf514

Read full answer
Feb 18, 2011 • 2006 Kia Sedona
0helpful
1answer

How do you tighten (which bolts)the fan belt and power steering belt
Hello lubyamanda and thank you for asking your question here on fixya.com.

I have actually written a general information article that will walk you through the general process of changing the fan belt on your 2000 Kia Sephia. It will also point you to the resources you need for getting the diagrams of how the belt needs to go back on. Belts usually cost less than $20 and take a few minutes to put them on.

Here is a link to that article:
How to change the fan belt on your 2000 Kia Sephia

If this has helped you in any way, then feel free to follow my Twitter account for more great money saving tips and tricks. twitter.com/acoates23234
I follow back, too. :)

Thanks for reading.
Read full answer
Aug 15, 2010 • 2000 Kia Sephia
1helpful
2answers

2001 kia sephia power steering system , is the power steering pressure line a separate piece ?
yes there are a few different lines to the power steering system
Read full answer
Jul 20, 2010 • 2001 Kia Sephia
0helpful
2answers

POWER STEERING WENT OUT, 2001 SEPHIA
check the fluid. if its fine then you probally need a rack and pinion. also check the belt that runs the pump.
Read full answer
Feb 05, 2010 • 2000 Kia Sephia
0helpful
1answer

My Kia sephia is having a lot of trouble accelerating and shifting up. My belts broke two weeks ago and I had a leak in my power steering hose. I got all of that replaced and the air filter changed. Now...
i think the transmission went they are notorious for going out
Read full answer
Jul 24, 2009 • 2000 Kia Sephia
0helpful
1answer

Power Steering Pressure Hose
Simple. Remove bolt from pump. Remove 2 10mm bolts that anchor it to the frame. Then disconnect it where the 2 hoses meet just behind the alternator. Takes less than 3 minutes without air tools.
Read full answer
Apr 11, 2009 • 1999 Kia Sephia
0helpful
1answer

1997 kia sephia rs i am trying to change the power steering and alternator belt
3 14mm bolts on power stering pump than loosen the 12 mm adjuster bolt 2 bolts on alt. one 14mm on bottom one on adjuster than loosen the adjuster
Read full answer
Mar 02, 2009 • 1997 Kia Sephia
1helpful
2answers

I need to rplace tke power steering hose on a 2000 kia sephia
we tried fixing the old power steering hose, finally just had it taken off and another made up by an auto shop, cost $65 to have one made. very easy to fix, just undo at each end. this is a pressure hose though so make sure and get the same kind made.
Read full answer
Nov 08, 2008 • 2000 Kia Sephia
Not finding what you are looking for?

View Most Popular

2000 Sephia

  • Cars & Trucks

Related Question

How to change a power steering belt on a 2000 kia sephia

  • 2000 Kia Sephia

149 views

Ask a Question

Usually answered in minutes!

Popular Questions

How to locate and replace

2001 Kia Sephia

Where is the turn signal flasher located in the car

2001 Kia Sephia

2000 kia sephia fuse box dirmgram

1998 Kia Sephia

Fuse panel diagram for 1999 kia sephia

1999 Kia Sephia

2001 kia sephia automatic transmission not shifting

2000 Kia Sephia

Check Out the Latest Top Trucks Report!
Check Out the Latest Top Trucks Report!

View all Fixya Reports

Top Kia Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Brad Brown

Level 3 Expert

19187 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a Kia Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...