Why wont the lift work from inside on my deutz agrotron 620 traCTOR

I think the Deutz F3L 1011F engine is a 3 cylinder engine.So it fires as 1, 2, 3. Number 1 is the cylinder nearest the belts and pulleys end of the engine.

Hi mr. Roberto Oscar

You must download Deutz Service Manual to see this information.

Download Link: https://epartsmanuals.com/deutz/deutz-fahr-parts-manual-catalog-pdf/

I recommend you to hit search on this website, and find now the manual that you need. It's very easy and fast to download the parts manual from this website.
Good luck.

Check the fluid level.

Hello mr. Mike

You must download Deutz Service Manual to see this information.

Download Link: https://epartsmanuals.com/deutz/deutz-fahr-parts-manual-catalog-pdf/

Massy Ferguson hydraulic pump is worn out. You might could drain the hydraulic oil out and fill with 80-90 sae gear lube that will work fine in that tractor.

firing order is 1-2-3
so when no 2 cylinder valves are in the rock position ( exhaust closing at the same time as inlet is opening) that will be no 1 piston tdc compression stroke adjust the both valves to the specification
.006" both valves
when no3 piston has valve rock adjust no 2 cylinder valves
when no 1 has valve rock adjust no 3 cylinder valves
go google and type in valve clearance of deutz 3 cylinder engine
there is another method explained where inlet of one cylinder and exhaust
this is done with one full revolution of the crank
www.deutzamericas.com page 42 of the manual

Is there something getting in around engine to damage belt

most I have seen are on a flat spot where the head sits on the block.. its stamped on there..

Afternoon,
F3L912 Deutz, serial 8547710 can you explain to us how to set the timing sequence please for the motor mention.