You do not normally "reset" the computer.. If you are asking how to turn off the service engine soon, or any other check engine lights you need a "scan Tool" which many auto parts stores sell.. in some areas ( Not California) you can go to an auto zone or other auto parts stores and thet will scan it for you, they can clear the codes. The codes that they give you when they scan can tell you a lot about what is wrong or going wrong with your car.
For security. If everything is working. Shut the doors and lock it up. Unlock the drivers side door. This should reset security. Reset the ECM. disconnect the battery for 30 minutes. This only resets the ECM to factory defaults. It will not fix any problems.
SOURCE: 1998 ford expedition blinking overdrive light
This blinking light indicates a problem. You will have to have it scanned for trouble codes to find out
what it is.
SOURCE: 1998 ford expedition wont start. theft like is
If you are reseting a factory alarm...lock and unlock the drivers door with the key.
If you don't know the code look under the dash driver side in left corner there should be a black cover with a sticker with a code on it 6 numbers that is the factory code.
SOURCE: 1998 Ford Expedition XLT 4 wheel drive switch is frozen in 4H
solenoid switch that engages the 4WD more likely will need replacing. fairly cheap to fix replace.
SOURCE: fuel pump reset button location 1998 ford
It is on the front passenger side, under the side panel. Hope this helps..
Cobra :-)
SOURCE: need routing diagram for 1998 ford expedition
Check this...
Other details can find in 1998_ford_expedition_drive_belt_routing_diagram
Hope helps (remember comment and rated this).
752 views
Usually answered in minutes!
×