How do i change oil pump - 2000 Hyundai Accent

WHERE IS THE OIL PUMP? AND HOW DO YOU CHANGE IT? 2005 Chevrolet Impala
Asked by monkeyman in Alexandria, LA on July 04, 2011
I HAVE TO CHANGE THE INNER RINGS.
1 reply ReportAnswer Popular Answer
chinasinoy on July 05, 2011
The oil pump is in the oil pan it is used to pump oil that is in the pan, around 4qts up and through the parts of the engine, are you looking for the oil filter?
This is a video teach you how to change it.
http://www.ehow.com/video_2327479_install-engine-oil-pump.html
hope that helps.

Ford F150 5.4L Timing Chains and Guides Oil Pan Oil Pump ...

? 5:08
https://www.youtube.com/watch?v=BgvGjfzrRjU
May 10, 2014 - Uploaded by dezertol
Ford F150 5.4L Timing Chains and Guides, Oil Pan, Oil Pump, Cam ... i am looking into changing the oil pump myself... did you try removing the intake ... I need help with my timing for i 3v4.6 mustang gt, im about to take of my ...

Ford 4.6L, 5.4L, 6.8L Engines -Melling Oil Pumps - YouTube

Chrysler Concorde oil pump Questions & Answers - Fixya

www.fixya.com > Forum > Tags > oil pump > Cars & Trucks > Chrysler
Ask your Chrysler oil pump related question. ... oil pump in 1999 chrysler concordehow do you change the oil pump in a 1999 ... Question about 2000 Concorde.

Most likely the oil pump light will come on if the oil pressure is low. This light is based on a pressure sensor. Your oil pump is likely not operating to deliver the required pressure. Check that your pump is installed properly.

Possibly a failed oil pump. Check engine oil level first.Make sure it is at least to the safe zone on your engine dipstick. if the motor has not had regular oil changes ( i change mine every 3000 miles like clock work) the oil can sludge and clog oil passages and pickup screen to oil pump.

Changing the oil pump is not easy, the oil pump is situated in the engine oil sump. So you have to go under the car and remove the oil sump pan to get at it. First you have to drain the oil. I recommend you buy a repair manual such as Haynes from a auto parts shop for about $15 before you start the job and follow the instructions in the manual. Good luck

Two things I can think of. did you prime the new oil pump?. If so the oil pump by pass valve may be stuck open. I often prime a pump with petroleum jelly as oil often leaks out .

four theories.. two easy.. two not so easy.
one. oil filter is plugged.- change the filter
two. the pick up screen in the oil pan is clogged.- remove oil pan(if you go this far change the oil pump on speculation)
three. the oil pump itself is worn out of tolerance.- remove oil pan, change pump
four. the sensor is defective- change the sensor on side of engine.

Yes it can, do an oil change and filter. If oil isn't changed at regular intervals, the filter can become clogged and won't get a good flow.
It's best to change the oil every 3 months or 3,000 miles, whichever comes first.
Changing the pump is not an easy job.

take long bolts out that run thru motor mounts ,jack in front of motor all bolts in oil pan out, remove oil pan and then remove oil pump, replace new pump ,torque to specs, replace oil place with new pan gasket , bolts back thru mounts and ready to go, hope to help, thanks robert b.