Cylinder number for firing order for 1993 Isuzu Trooper

really easy 123456 ,counter clockwise you can see it for your self at autozone library its all free and no spam, with the fan facing you first cylinder to your left is #1 first cylinder to your right is #2 it dosent matter where you start as long as you follow the firing order

gee guy, 3.1L or 3.2L?
you only need 3 things to time the distrib. static.
where is #1, its the most forward cylinder, LOOK carefully.
forward means closest to the cam drive end of engine.
not flywheel end.
rotor rotation direction (crank and watch it)
now the order, 3.2l v6? IS It? the single cam?
1990 trooper v6
answering for only USA car...
our 3.2 has no distrib V6 its DIS.






3.1L V6 USA spec. only. rotor is CCW

the firing order is 03165 here is also a link to autozone.com which shows photo's and more detail. http://www.autozone.com/servlet/UiBroker?ForwardPage=/az/cds/en_us/0900823d/80/18/38/4a/0900823d8018384a.jsp

Hi!!


Firing order 4 cylinder engine 1-3-4-2 --------- front | | of | 1 2 3 4 | distributor rotates counter vehicle | | clockwise ---------

Firing order 6 cylinder engine 1-2-3-4-5-6 ------- front | 1 3 5 | of | | Distributor rotates clockwise vehicle | 2 4 6

Appreciate if rate this post, Good Luck!!

firing order is 1 2 3 4 5 6. does it run smooth?? you cant change it even if you want to....Number 6 cylinder coil is longer than the others. Check fuel pressure, ck scan data. there isnt much you can do without a scanner. Was timing belt been done before you bought it?? maybe the cam timing is off???

look on the door and there is a 3 digit number for paint code and a 3 diget number for the trim code.

Firing order is stamped on the block intake manifold or label. 4 cyl are typically 1324

From the web:
The firing order for four cylinder engines where the cylinders are in-line is 1243 or 1342.
Those are the only two possibilities I've ever found for inline four cylinder engines. In practice, it's almost always 1342, except for Ford engines which are 1243.


Take one off at a time and replace it

Do not run the wires parallel (side-by-side) for more than 6". Cross them over each other wavy-like if needed. This will prevent crossfire.

Replace Points, Plugs, Condenser, Rotor and Cap too.

Good luck!

this link was from the autozone online manual i think this is what your looking for thanks jeff http://www.autozone.com/N,26400242/shopping/specsSelect.htm

Hi,

Assuming your 1995 Isuzu Trooper is using the 3.2 SOHC engine, the firing sequence would be as shown here.
. This was originally posted here. An actual image which was originally posted here.

Hope this be of initial help/idea. Pls post back how things turned up or should you need additional information.

Good luck and kind regards.

Thank you for using FixYa.