SOURCE: serpentine belt replacement
2.0L Engines
See Figures 11, 12 and 13
The
accessory drive belt for 2.0L engines has no provision for manual belt
adjustment, since these engines use an automatic belt tensioner. Drive
belt slack is taken up by the automatic tensioner.
Movement of
the automatic tensioner assembly during engine operation is not a sign
of a malfunctioning tensioner. This movement is the tensioner
self-adjusting and is required to maintain constant belt tension.
The belt tensioner has a belt length indicator. If the indicator marks are not between the MIN and MAX marks, the belt must be replaced.
Fig. 11: Drive belt routing-2.0L SOHC engine with A/C
Fig. 12: Drive belt routing-2.0L SOHC engine without A/C
Fig. 13: Drive belt routing-2.0L DOHC engine
SOURCE: serpentine belt diagram:
if yours has the 3.8L then here is the diagram. Hope this helps
~ Zach
SOURCE: i need a diagram of 1999 ford contour serpentine belt
Top one is for a 2.0, with AC, bottom one is the 2.5 with AC.
SOURCE: 2006 ford taurus serpentine diagram
http://www.mvreader.com/multiview/dayco/catalogSearch.php?autoCatalogSearch=1&make=FORD&model=TAURUS&year=2006&year_from=&year_to=&engine=All&l=n
This should Help. Please Rate My Response! Thanks!
Thanks for using FixYa - a FixYa rating is appreciated for answering your FREE question.
873 views
Usually answered in minutes!
×