How do I remove console from 87 Olds Cutlass Supreme to replace cable

check the fusebox under your hood for the horn relay,should be a black box close to your battery that has fuses in it

It doesn't have any marks. Make your own before you remove the belt. If the belt was broke or you already removed the belt then you will have to remove the valve covers and install specialty tools into the ends of the camshafts to line everything up correctly.

You have to find the linkage and pull it. If yu cannot find the linkage, one trick is to go to a self serve wrecking yard and play with one of the 90s olds by removing the door panel and looking at it to see how it works.

can you maby push the lever forwards and then push it in or maby remove it all together and see what the issue is maby some obstruction .try prying it up and out

Start by checking the fuses that's simple
than relay than bulbs
last you may have to remove the steering wheel and than replace the entire signal assembly those are pretty much all your options so start with 1 and work your way down the list

Disconnect the battery to do any service on the steering column or front radiator areas.

This car uses r12 freon that is the old stuff but you can have your system converted over to the 134a.

Yes, it will go right in.

possible thats its where the line hooks to the carburator or the carb itself is leaking

olds mobile club of america should have your answer.