Cars & Trucks Logo

Related Topics:

S
Shane Jackson Posted on Feb 12, 2015

Hyundai excel wont select overdrive. if you press the button it goes into nutral until you push it again

  • Stephen Peter Ross
    Stephen Peter Ross Feb 13, 2015

    Hi Shane Jackson, I want to help you with your question, but I need more information from you. Can you please add details in the comment box?
    In particular: at what speed are you trying to deselect Overdrive OFF? How do you know that the top gear is no being selected with overdrive-Off turned off? Is it manual or automatic? Are you in automatic mode of select speed mode?

×

5 Related Answers

Anonymous

  • 1665 Answers
  • Posted on Jun 29, 2008

SOURCE: Hyundai Overdrive wont engage

It is not suggested strip and twist wires. Better take it to an authorized service station to check what causes the problem.Is it OVERDRIVE SWITCH or CRUISE CONTROL MODULE faulty?
Over drive switch has three points. (5 to 4 selects "ON" or 5 to 6 selects "OFF").
Right click on following schematic, "save picture as" to a location in your PC so you have a ZOOM IN view.


CRUISE CONTROL SYSTEM SCHEMATICS
923a890.gif

Ad

wjtbenji

  • 2 Answers
  • Posted on Sep 29, 2008

SOURCE: 1998 Ford Explorer

there is an sensor on the speed odmeter cable on the side of transmission. it will kill thr overdrive and cruise control but not the speedometer. about $50.fixed 2 explorers that way

Efstathios Govas

  • 285 Answers
  • Posted on Oct 14, 2009

SOURCE: my transmission wont **** into overdrive.

i bet it just started doing this when the weather changed,some transmissions have an internal thermostat and will not go into overdrive until a certain temp when starting from a cold start,you might also want to consider a trans service,hope this helps

Anonymous

  • 10 Answers
  • Posted on Mar 07, 2013

SOURCE: transmission goes into nuetral when overdrive is ingaged

over drive is a gear its self it may be going out in the trany so when that over drive button it pushed it thorws it in to that gear that may be out no and it dont matter is you try to sift because it is a gear its self my car is 4 speed drive 1 drive 2 drive (3 gear) and overdrive (4th gear)

andrewsma98385

Andrew Smart

  • 230 Answers
  • Posted on Feb 12, 2015

SOURCE: why wont my hyundai excell single cam go into over drive press the button and goes into a neutral gear

possibly wrongly adj shift linkage and you push on it slightly when you are pushing the button

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

Why wont my hyundai excell single cam go into over drive press the button and goes into a neutral gear

possibly wrongly adj shift linkage and you push on it slightly when you are pushing the button
0helpful
1answer

Overdrive light on dash does not work,how do I know if it is on or off on the gear stick?

press the button in overdrive is on,button out overdrive is off,and wile accelerating if it goes all the way to the redline before changing gear overdrive is on!
1helpful
1answer

My 1999 model hyundai excel has " O/D off" light

It means the driver hit the button on the shifter to turn the overdrive off, or the computer has disabled it because of a mechanical problem.
0helpful
1answer

Does o/d button hurt car? what is it for?

No not at all, i fact it is quiet handy and should be used in ost driving situations. o/d stands for overdrive. When you select this mode the transmission goes into overdrive. Someing up in a sentance, the engine is required to do less revolutions to turn the rear wheels through different ratio's. Most times overdrive wont kick in until around 45mph. Use this function at all times and you will get better fuel economy and put less strain on the engine. Turn it off when towing or approaching a big hill!
0helpful
1answer

How do I reset my 2008 Honda Accord oil %

Honda Accord 1998-09 To reset MAINT REQ’D light, press and hold select/reset button on right side of instrument panel. Turn ignition on and hold until the light goes out.

On the right of your dash is a pair of buttons, one for selecting/changing the odometer and the other for cycling from MPH to KMH and back.
Turn the key on.
Push the select button until your display indicated the remaining oil life percentage. When it is displayed press and HOLD the select button until it begins to flash. Once it starts flashing release the button and press and hold it again. The display will clear and if you release the button and cycle through the display with the select button you will see oil life 100%. Good luck and this should reset the oil life.





0helpful
1answer

My transmission wont **** into overdrive. 1999 SL2 twin cam. When the engine gets warn it usually goes into overdrive. When it is not into overdrive the tach neddle goes up and down 300 rpm when I push on...

i bet it just started doing this when the weather changed,some transmissions have an internal thermostat and will not go into overdrive until a certain temp when starting from a cold start,you might also want to consider a trans service,hope this helps
2helpful
1answer

Hyundai Overdrive wont engage

It is not suggested strip and twist wires. Better take it to an authorized service station to check what causes the problem.Is it OVERDRIVE SWITCH or CRUISE CONTROL MODULE faulty?
Over drive switch has three points. (5 to 4 selects "ON" or 5 to 6 selects "OFF").
Right click on following schematic, "save picture as" to a location in your PC so you have a ZOOM IN view.


CRUISE CONTROL SYSTEM SCHEMATICS
923a890.gif
Not finding what you are looking for?

121 views

Ask a Question

Usually answered in minutes!

Top Hyundai Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Brad Brown

Level 3 Expert

19187 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...