Replace transmission control switch on mitsubishi challenger

https://www.google.com/search?q=fuse+box+located+in+a+Mitsubishi+Challenger+pa+2000

..

No they are crooks! The genuine part from Mitsubishi is $120 and it looks like you could do it yourself.

Where is the transmission fluid pressure sensor? The pump pressure switch is located on the transmission housing next to the pump. The switch lets the computer know what the pressure is coming from the pump when the engine is running. The servo pressure switch is located on the housing near a band or servo in the transmission.
Oct 11, 2016 Videos

https://www.google.com/search?q=2016+mitsubishi+outlander+transmission+fluid+pressure+sensor+location

..

its located in the fuel tank as part of the fuel pump assembly.

The reverse lights are operated/controlled by the neutral safety switch located on the transmission close to the tranny dipstick. This switch is adjustable and may correct your problem with a slight adjustment. Here is a picture that may help.

P0705 - Transmission Range Sensor Malfunction. The park/neutral position (PNP) switch includes a transmission range switch. The transmission range switch detects the selector lever position when the shift lever is in the N or P shift position and sends a signal to the Transmission Control Module (TCM). The possible causes of this are the following: Open or short park/neutral position switch circuit. Poor park/neutral position switch circuit connection. Misadjusted park/neutral position switch. Park/neutral position switch may be faulty. Inspect the pnp switch and replace if needed.

All automatic transmissions have a filter, which is located inside the transmission pan. To replace filter, you will need to remove the transmission pan. Before replacing pan be sure to remove any old gasket that may still be present on pan and the mount on transmission. Refill with proper type and amount of fluid...DO NOT OVERFILL

Save yourself a big headache and get a new radiator!!

You'd have to review a number of items to make this swap, engine rotation, width, depth, location of oil pan sump and such. Your biggest issue will be that of electronics. If your looking for fuel injection you'll have to use the ECU from the other engine with its sensors. Other big issues is engine to transmission transission, you'll have to create a machined plate to act as an adapter to bring the two together. I realize the 3.0 V6 engine can be a challenge to get parts for and such but dollar to dollar replacing the 3.0 V6 with something else would be a costly endevor. I have rebuilt the 3.0 using a lacal shop, it's a challenge but far easier then the engine swap. If you do make the swap post it on youtube as many of us would like to see it.
Best of luck,
Tom

I have a 95 Eclipse and I recently had to change out my TCU........ Transmission Control Unit, This should be located directly beneath the center console. First I would have the transmission services if problem persist then proceed to changing out the TCU you can get off of ebay. As far as i know there should be 3 Computers in our cars. 1 the Electronic Control Unit located behind radio 2 Transmission Control Unit located under center console and 3 Airbag Control Unit located under hood, Hope this helps.