Just bought it
SOURCE: hard shift and blinking overdrive
The blinking overdrive button is telling u that a serious fault has occurred in the electronic controls or a mechanical fault such as excess slippage is occurring.
SOURCE: slight miss in engine, hard shift from 1st to 2nd long 2nd gear
Check both O2 sensor(s) and catalytic coverter.. P0420 means catalyst below threshold. Also check the sensor at the transmission and solenoid.
SOURCE: Problem with 95 ford f150 v6automatic transmission -hard shifting
A sticking 1/2 shift accumulator or broken spring in the 1/2 shift accumulator.
SOURCE: Hard Clutch and 1st and 2nd Gear Shifting is hard
The clutch bearing is supposed to have a groove on the inside where it slides on the shaft That groove is supposed to have a heavy grease applied to it to prevent the bearing running dry on the collar it slides on.Regardless of your driving style, that grease is intended to remain there for the life of the clutch, (generally every clutch I have ever replaced still had some remaining lube there unless the bearing itself failed from a material defect which caused it to overheat and cause that grease to then run out of the retaining groove) I'm not there and can't see the old parts, but in my opinion the first clutch may have failed partially because of your lack of skill in using a stick shift vehicle but the second failure obviously is not your fault if the information you have posted is correct.
Good luck
SOURCE: 1997 chevy k1500 pickup-transmission shifting problems
check the fluid level in the transmission, also change the transmission fluid and filter
169 views
Usually answered in minutes!
×