How do I remove the factory longitudinal roof bars on a 2006 Mitsubishi Outlander?;

Visit the on-line store, known as reliable-store, they have the repair manuals. I'm sure you will get the solution of your problem.
MITSUBISHI OUTLANDER ZG 2006 2008 FACTORY Service Manual

Because your looking for a relay.

May simply be the throttle body adjustment. This is all dismantled to get to the head gasket.

spark plugs are under valve cover. Each plug has its own coil pack module. Plug is under this. Be ware, factory plugs may have to be ordered ( $ 15 - 20 ea.) , depending on parts stores in your area. here in Canada, some stores had wrong computer listings for all brands of plugs for this car!! The factory plugs are NKG Iridium, and are longer than conventional plugs!! I'm about to change mine ( 160000 KM's).Looked at plugs cpl mths ago, didnt look too bad. Hope to get another 160 K's from new ones ! Good luck .!

put some tape on a flat screw driver a pry the lense off keep wiggling the lense and it will come off be carefull not to scratch the paint good luck CJ

YOUR AXLE BEARING ARE SEAL THEY ARE PRE GREASE BEFORE SEAL NO MAINTINCE ON THEM.

Remove the clamshell cover from the column (philips screws)

Press together on the top and bottom levers on the headlight switch base and pull outward.

use the dipstick hole, you need a certain funnel. if you cant fiind it let me know.

they have a little clip over device you look close and you will see how it works just pull the clip device back and pull it off .. Jerry