Checked fuses for one blown but no diagram to label which fuse is what.
Robert is wrong every vehicle I have worked on always had a fuse to protect the circuit from overloading. The problem might be charger is set to work only when key is on. My last car that I worked on was that way and the last car I owned depended on how you set the fuse whether it worked key off or on. If it was a fusible link like Robert said you would have to replace wires. Let me know if you still need fuse #
If the car charger is bad and it's the front one; i.e., cigarette lighter. It's usually the fusible link not a simple fuse. It is powered directly from the ignition switch.
SOURCE: 1997 Dodge Caravan Fuse Box Diagram
i need your vin # to check the wiring diagram
there is at least five diferent ones
SOURCE: 2004 dodge neon fuse problem.
The dome tight is actually a combo fuse/light. If that light is burned out; 1 the locks won't work, and 2 the odometer will flash "FUSE" and 3 the "DOOR" warning light will stay on - try replacing the bulb. If it stays on with all the doors closed, more then likely one of the switches that are built into each of the door latches is not making the correct contact to shut off the dome light/dash light. The correct fix is to replace the defective latch. The other option is to just cut the wires that feel the switch inside the door - then the car will think that door is always closed and the lights will not come on when you open that door.
SOURCE: help need fuse box diagram 04 dodge durango
It seems that because the diagram for the fuse codes aren't located in the owners manual, it would be a dealer item only. One possible solution is to buy an assortment of fuses.. maybe (15) switch them out 1 by one.
SOURCE: 2004 Dodge Durango blower fan does not work
If your blower only worked on high before it quit, or didnt work on high before it quit,
You probably have a faulty blower motor resistor assembly. The part number is 04885635ab If you look on the bottom of the motor housing on the passenger side (about where the passenger toes would point) you will see a wire harness that is a long oval in shape and has 5 or 6 wires in it. You will need a 7 or 8mm 1/4 inch drive socket with a u-joint attachment. on the firewall side of the connector, there is a sliding lock that keeps the connector on the plug. you will have to slide the lock toward the drivers side and the squeeze a small blak tab to pull the connector off of the plug. Once the connector is off, use the socket to remove the 2 screws. It will drop right down once the screws are removed. Once it is removed, it looks like a 2 inch by 3 inch by 16th of an inch thick piece of metal with a plug on it. The resistor pack dissipates ALOT of heat so do not take it out until the truck has been off for 30 minutes or so. I priced the part at a dealership for $12.77
SOURCE: fuse box diagram for dodge durango
What year durango and which fuse panel? under the hood or under the dash?
341 views
Usually answered in minutes!
×