If your system has one, it would be located on or near the water inlet (also known as goose neck). The water inlet is located at the end of the top radiator hose and houses the thermostat. Its usually a 6, 8 or 10mm hex screw. It does not need to be removed, just loosen to allow air to escape as coolant is added. When coolant start to come out, retighten it.
Are you referring to the drain plug? if so, it is located on the passenger side bottom facing the front bumper. see attached diagram under radiator removal.
http://www.kia-forums.com/attachments/kia-carnival-sedona/9678d1319024147-removing-radiator-kia-sedona-2005-remove-radiator.jpg
1,062 views
Usually answered in minutes!
×