How do i get rid of code p0325 - Cars & Trucks

DTC P0325: Knock Sensor (KS) Circuit
P0325
The KS signal circuits are open or shorted together for 6 seconds.
probably need a new sensor

TPS sensor (RPM) po120,knock sensor po325.

Both the codes here are engine codes you need to be able to pull ABS codes. P0325 is a knock sensor code and the P0496 is evap purge flow high. These will not cause a ABS or Traction control problems.

What gasoline rating is the octane?

the p0325 is a knock sensor failure. you can see more here. http://www.nissanforums.com/a32-1995-1999-chassis/99925-engine-code-p0325-knock-sensor-failure.html

the p0335 is the crank position sensor.

Hope this helps.

P0325 is a knock sensor. the knock sensor will not set the ses ligth

Code P0325 Knock sensor 1 circuit malfunction (bank 1 or single sensor)

CODE PO420 CATALYST SYSTEM EFFICIENCY BELOW THRESHOLD BANK I * CODE PO325 KNOCK SENSOR NO.1 CIRCUIT MALFUNCTION BANK NO.1 OR SINGLE SENSOR

A P0325 refers to the knock sensor electrical circuit, not the sensor itself! So check all wiring & connectors leading to the sensor, back to the PCM. Good luck, I found a good P0325 article here - http://www.obd-codes.com/p0325

Hi,

The two codes seem to be related. The P0325 description is knock sensor circuit malfunction and the P1320 is ignition signal - circuit malfunction.

I'll summarize and then give links on more detailed articles I found. Basically the P0325 refers to the knock sensor and associated wiring. The P1320 refers to the ignition coil and wiring. Check the sensor, coil, and associated wiring.

I found some great articles:
P0325 - http://www.obd-codes.com/p0325
P1320 - http://autorepair.about.com/library/a/1i/bl039i.htm

Good luck!