Explaination and pictures on how to replace the spark plugs
Remove 1 spark plug wire from the plug. Find a socket that fits the spark plug and connect it to the socket wrench. Put the socket on the spark plug and turn counter clock wise until the old spark plug is removed. Check the gap on the new replacement plug ( make sure you have the correct plug first). Put the new spark plug into the hole that the old 1 came out of and turn clockwise by hand making sure it is in straight, then tighten it clockwise until tight.( WARNING: DO NOT OVER TIGHTEN THE PLUG OR YOU WILL BREAK IT). replace the spark plug wire. repeat the process with the other 3 spark plugs. Start the vehicle. If you are replacing the wires, take off 1 wire at a time, match up the size and replace the old with the new.
SOURCE: change spark plugs 2001 4 cyl hyundai sonata
You change One spark plug, and One wire at a time. Do you know where your timing belt is? If not, its on either the right or left side of the engine. There is a covor to the timing belt. You take the First plug that is closest to that belt. Then you work your way to the next closest all the way to the last one. Remember, you have to do ONE at a time.
SOURCE: Locating and changing spark plugs on 2007 Hyundai Sonata 4 cylinder
They are directly below the coil packs (10mm bolts).
SOURCE: hi i have a 2004 hyundai sonata 4 cyl dohc and i
hi,
i have attached the image of the spark plugs and their location of them, in your car. Hope your problem is solved.Please rate my solution as helpful.Have a nice day.
Testimonial: "Thanks You Helped Me A TON!"
1,231 views
Usually answered in minutes!
×