2010 Ford Mustang Logo
j
john starr Posted on Dec 24, 2014
Answered by a Fixya Expert

Trustworthy Expert Solutions

At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.

View Our Top Experts

How to find and replace 2010 mustang v6 input speed sensor error code po 715 where is it ?

Replaced output sensor cant find input?

Answer This Question

1 Answer

Rich Sandstrom

Level 2:

An expert who has achieved level 2 by getting 100 points
MVP:

An expert that got 5 achievements.
Cheetah:

An expert who has answered 20 or more questions within one hour.
Hot-Shot:

An expert who has answered 20 questions.

  • Expert 83 Answers
  • Posted on Dec 24, 2014
Rich Sandstrom
Expert
Level 2:

An expert who has achieved level 2 by getting 100 points
MVP:

An expert that got 5 achievements.
Cheetah:

An expert who has answered 20 or more questions within one hour.
Hot-Shot:

An expert who has answered 20 questions.

Joined: Mar 15, 2011
Answers
83
Questions
0
Helped
14151
Points
153

Turbine Speed sensor is the input sensor.

5 Related Answers

Anonymous

  • 1 Answer
  • Posted on Jun 21, 2009

SOURCE: Hyundai Trajet automatic output speed sensor problem

Priced new output speed sensor €190, went to breakers yard, found similar sensor on mitsubsihi carisma, purchased €20, fitted same no problems since. Touch wood!

Ad

Anonymous

  • 276 Answers
  • Posted on Nov 19, 2008

SOURCE: VEHICLE SPEED SENSOR

The VSS sensor is located on the transaxle .
If the VSS is defective replace the instrument cluster

Anonymous

  • 3533 Answers
  • Posted on Mar 20, 2009

SOURCE: replacing output speed sensor on 2002 sonata

try autozone.com to see if they have your car listed for diagrams pictures and step by step instructions if your car is not listed then try your local library they have all the car manuals and even copy them for you

Anonymous

  • 1 Answer
  • Posted on Sep 22, 2009

SOURCE: speedometer intermittently stops working

your ABS module (board) is crack and a good fixman could check that to fix or change it

Anonymous

  • 1 Answer
  • Posted on Feb 12, 2010

SOURCE: Where is the output speed sensor on a 01 hyundai santa fe?

I wanted to post a reply to this because I also have a 2001 2.7l V6 4wd and my output speed sensor was directly underneath the air filter housing/box and NOT "deep behind the transmission" as the poster said above. It was very easy to get to, and took me about 10 minutes to replace. The part number for mine (genuine Hyundai/KIA) is 42621 39052 if that helps. And this is NOT the 02 sensor mentioned in the previous post. What we're talking about here is the Output Speed Sensor on the transmission. You may get a code P0720 from your CEL. You can also download TSB 05-40-011from hmaservice.com for more info and a diagram of the location. Hopefully this might help someone in the future. Good luck!

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

I have these codes showing po 722 po 717 po 581 po 592

PO722 - output speed sensor
PO717 - input speed sensor.
P0581 – Cruise control system, multi -function switch input A circuit high

P0592 - I cant find any information on this code
Read full answer
Jul 15, 2019 • Cars & Trucks
1helpful
1answer

I have a 1998 dodge caravan 3.3L fault codes p0500 p0700 p0720 p0715, how do I repair and replace sensors to pass smog test
Follow the links for each fault code.
http://www.obd-codes.com/p0500
P0700 Transmission Control System Malfunction
P0720 Output Speed Sensor Circuit Malfunction
P0715 sets when there is an error in the transmission's input speed sensor signal. On the front of the trans there is an input and output speed sensor that the trans controller looks at for shifting control.

While the code could have set because of a wiring or connection problem, it's almost surely the sensor. Input speed sensor failures are not uncommon.

The input speed sensor is mounted right on the front of the trans directly under where the cooler lines attach. It threads directly in and has a 1" hex for a socket for removal. If the wiring and connection look visibly ok then I would recommend replacing the sensor
Read full answer
Jul 06, 2016 • Dodge Cars & Trucks
0helpful
1answer

2010 mustang v6 input speed sensor code po 715 where is it ?
that is the input/turbine speed sensor circuit malfunction. or turbine shaft speed sensor. it tells the car when to shift.
Read full answer
Dec 24, 2014 • 2010 Ford Mustang
0helpful
1answer

Po731 and Po715 on '96 grand caravan
Code 731 is for the computer thinks the ratio is wrong for first gear, and code 715 is for a problem with the input speed sensor. Code 715 could cause code 731.
Someone would need to check the sensor and possibly replace it.
Read full answer
Aug 03, 2012 • Dodge Grand Caravan Cars & Trucks
0helpful
1answer

Check engine light po 731
Diagnostic Test Code (DTC) P0731 is a transmission fault code and has a generic description of "GEAR RATIO ERROR IN FIRST GEAR".

The Powertrain Control Module (PCM) monitors the input shaft speed and the output shaft speed of the transmission through the input and output speed sensors. The proper gear ratio will produce a predictable difference between the two sensors. This DTC sets when the expected difference differs greatly from the actual difference between the two speed sensor readings.

This can be caused by several things including:
> Defective input speed sensor
> Defective output speed sensor
> Defective connections or wiring between either speed sensor and the PCM
> Shorted speed sensor circuit
> Open speed sensor circuit
> Slipping clutches inside the transmission

Please note that Transmission Control Module (TCM) replacement WILL NOT correct for this code.

The speed sensor data must be monitored with the proper equipment and the speed sensor circuits must be verified for proper function to determine the actual cause of this fault.
Read full answer
Dec 04, 2011 • 1996 Plymouth Grand Voyager
2helpful
1answer

What does the po 732, 733 and 734 codes mean on a 2002 Chrysler Pt Cruisier?
It means that your input and output shaft speed sensors see an error in the 2nd 3rd and 4th gear final drive ratios during the driving of the vehicle.
Read full answer
Apr 11, 2011 • 2002 Chrysler PT Cruiser
0helpful
1answer

Code PO 172 and PO 175 System Lean Bank 2 2000 Mustang V6 Shop says Maniforld right side is broken and that may Cat's plugged possibe 02 Sensor Relace plugs 111,000 mi on care Dies at stop signs,...
the catalytic converter being clogged would cause the car to die! How does the car react when you push on the gas?
Read full answer
Jan 21, 2011 • 1996 Ford Mustang
1helpful
1answer

Trans code po 715 for 1998 dodge grand caravan
Hi
P0715 is for the transmission input speed sensor. This sensor is used for shifting control. It's mounted on the front of the trans, threaded in just under where the cooler lines meet the trans. It has a two wire electrical connector, and a 1" hex for a socket for removal.

This code could be caused by the sensor's wiring, but it's very likely to be the sensor itself and it will need to be replaced. This isn't an uncommon failure.

The input speed sensor runs less than $20 at a parts store and will be in stock at any parts store or dealer. It only takes a few minutes to replace.
Read full answer
Jul 15, 2010 • 1998 Dodge Grand Caravan
4helpful
1answer

Check engine light with following codes p 1529 p0720 p0715
P1529 indicates that your TCM asked the ECM to turn on the check engine lamp.

The range switch and the output speed sensors are the items that are abnormally affecting the operation of the transmission. The diagnostic logic in your computer can distinguish these issues from one another, so you'll definitely want to do both. You have no diagnostic code for the input speed sensor (P0715) listed, so I have made no recommendation to replace it. In my opinion, it's not a labor-intensive repair, so I wouldn't recommend replacing it unless you have reason to believe it's bad.

DTC - P0720 (OUTPUT SHAFT SPEED SENSOR SYSTEM)
Code No. P0720 Output shaft speed sensor system
If the output from the output shaft speed sensor is continuously 50% lower than the vehicle speed for 1 second or more while driving in 3rd or 4th gear at a speed of 30 km/h or more, it is judged to be an open circuit or short-circuit in the output shaft speed sensor and diagnostic trouble code No. P0720 is output. If diagnostic trouble code No. P0720 is output four times, the transmission is locked into 3rd gear or 2rid gear as a fail-safe measure.
Probable cause
Malfunction of the output shaft speed sensor
Malfunction of the transfer drive gear or driven gear
Malfunction of connector
Malfunction of the TCM

DTC - P0715 (INPUT SHAFT SPEED SENSOR SYSTEM)
Code No. P0715 input shaft speed sensor system
If no output pulse is detected from the input shaft speed sensor for 1 second or more while driving in 3rd or 4th gear at a speed of 30 km/h (19 mph) or more, it is judged to be an open circuit or short-circuit in the input shaft speed sensor and diagnostic trouble code No. P0715 is output. If diagnostic trouble code P0715 is output four times, the transaxle is locked into 3rd gear or 2nd gear as a fail-safe measure.
Probable cause
Malfunction of the input shaft speed sensor
Malfunction of the underdrive clutch retainer
Malfunction of connector
Malfunction of the TCM

Is needed replace.

Read full answer
Nov 04, 2009 • 2001 Hyundai Elantra
0helpful
1answer

Output Speed Sensor
dear friend:plse make sure that you replaced the output sensor and not the input speed sensor.the output speed sensor is the one closer to the fire wall,
Read full answer
Sep 16, 2009 • 2004 Hyundai Tiburon
Not finding what you are looking for?

View Most Popular

2010 Mustang

  • Cars & Trucks

Related Question

I have these codes showing po 722 po 717 po 581 po 592

  • Cars & Trucks

Related Topics

248 views

Ask a Question

Usually answered in minutes!

Popular Questions

My seat belt alarm keeps dinging even though my seat belt is secured/fastened. how do I make it stop?

2000 Ford Mustang

Shaker 500 stereo

2005 Ford Mustang

A diagram of a 2003 Ford Mustang interior fuse box?

2003 Ford Mustang

I need a fuse box diagram for a 2008 ford mustang

2008 Ford Mustang

Firing order diagram for a 289 motor

1966 Ford Mustang

Check Out the Latest Top Trucks Report!
Check Out the Latest Top Trucks Report!

View all Fixya Reports

Top Ford Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6988 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...