I need the timing marks for a 1994 1.6 vtech honda civic?

Try this video:

we need engine displace ment or exact honda type. ID
to answer fully.,
my guess, is the engine leaks oil and you have tried fix it
odd, you did the hard ones first. why not the valve cover
did you know there are 2 ways to find leaks.
1: clean it , all off, then run it and look. see live leak.
best is to do that with out driving as the wind blows it about.
find it , now you know what leaking.
2: use the UV dye kit.
quote wiki, but WHAT ENGINE ?????????????????
all base models were made with 1.6L engines. The EX-CX are all SOHC (Honda D engine). The CX, DX, and LX all have D16y7 non-VTEC engines; whereas the EX has a D16y8 VTEC, and the HX has D16y5 VTEC-E. The USDM Si and Canadian SiR came with a DOHC (B16A2 VTEC).

first tell engine, ! DOHC is quite different.

that is tricky since the VTEC has a totally different system, clubintegra.com has people that know a lot about the VTEC engines, they have been able to help me with my B18C!.

All Honda engines, except the Civic 1.3, 1.5, 1.6, 2.0 Vtec's and the CRv 2.0, will have the crankshaft mark that lines up with the gear key way.THESE, engines I noted for you, will have marks 1 - 2 teeth off to the right or left. Find the key way and look in this area for the mark.

You should remove the Crankshaft Pulley, because you have to remove the Timing Belt Cover to remove the belt, adjust tension, and line up the Timing Marks.

Here is the Service Guide for the Timing Belt on your 1994 Honda Civic 1.5l SOHC Engine:
http://www.4shared.com/document/TC9t2rMv/1992-1995_Honda_Civic_SOHC_Tim.html


I’m happy to help further over the phone at https://www.6ya.com/expert/jeremy_69f3cc28d95bf514

Click on the following: direct, free Link. It has the Timing Belt + Mark Diagrams for your 1996 Honda Civic 1.6L SOHC. It has several additional diagrams to help you.

Let me know if this helped, or if you have additional information or questions. Feel Free to contact me at FixYa.com!

http://www.2carpros.com/car_repair_information/year/1996/make/honda/model/civic/1996_honda_civic_timing_belt_diagram_marks.htm

For the 1998 Honda Civic 1.6L SOHC -In-Line 4-Cylinder:
For all: LX, DX, EX, GX and HX Models; VTEC and VTEC-E

Firing Order:
1-3-4-2

Cylinders:
...........(back)..........
|...4.....3....2....1...|
...........(front)

Distributor:
....(back)
..........1
2
........o
.................3
.....4
.....(front)
Rotation: Clockwise
Let me know if this helped, or if you have addtional questions. Feel Free to contact me at FixYa.com!

Hi:
The water pump is located underneath the timing belt cover, on the drivers side of the engine. To swap the water pump, you need to remove the timing belt cover, timing belt, and the timing belt tensioner. I usually tell people that this can be done in a day, but sometimes not ! Also, all of the other drive belts , such as Air conditioning and the alternator belt all need removed too.

This was listed under the 1994 Honda Civic by the Asker for a 1992 Honda Civic
Click on the following free direct Link. It has the Timing: Belt and Mark Diagrams for your 1992 Honda Civic. Plus additional Instructional and Directional Diagrams.

Let me know if this helped, or if you have additional information or questions. Feel Free to contact me at FixYa.com!
http://www.2carpros.com/car_repair_information/year/1992/make/honda/model/civic/1992_honda_civic_timing_belt_diagram_marks.htm

VTI is the model or classification of the brand civic.( like civic EX, LX, LXI etc) vtec is the branded name given to an engine. like VVTi for toyota and so on..