Replaced brushes in alternator ran and charged for 24 hours battery light started flashing and now will start if jumped but will not run to move
Start with the basics first....
BEGIN WITH SCANNING......
ISPECT BATTERY ELECTROLYTE LEVEL
INSPECT BATTERY CABLES/TERMINALS
LOAD TEST BATTERY,_______VOLTS @ 150 AMPS (Min SPEC 10.2 VOLTS @ 150 AMPS.)
INSPECT BELT(s),
TEST ALTERNATOR OUTPUT,_____AMPS @ 12 VOLTS @ 2500 RPM (SPEC ______ AMPS.]
TEST DIODE WAVE FORM
If you need further help, reach me via phone at https://www.6ya.com/expert/ralph_2f0886b7d6af32ce
It could be you have a fault in the Diode pack in the alternator you need to get this checked at an alternator repair center.
176 views
Usually answered in minutes!
×