I own a 2008 lexus rx 350 the problem is when i back up and brake hard it sounds like there metal tools rolling around in the back i can duplicate this noise by going forward and then back ward and s

Mike Vincent

• 358 Answers
• Posted on Jun 24, 2009

SOURCE: windows wno't roll down

will need both motors and regulators if you are getting power to the window motors.

SOURCE: How do I set the clock in a 2008 Lexus 350 RX

If you have the navigation system, you do it through that. There is a setting for daylight savings time and standard time.

SOURCE: How do I remove Head Light assembly on my 1999 Lexus RX 300

After removing the top and side bolts (which are obvious) Go to the fender liner. Remove all but the top screw . You will find (by flashlight or shop light) two bolts coming out of the headlight rear. With a socket wrench and 10mm socket, remove the two nuts on the headlight and pull out the headlight from the front after insuring the bulbs are removed and identified for reinstall. Take your time. It is not difficult.

SOURCE: 1995 Lexus SC300 drivers side window made a

the window regulator assembly needs to be replaced. remove the inner door panel and the insulating platic pannel. and remove the old unit, it use cables like that of your bike as a kid, the plastic pieces that hold them in place just go bad from time to time

Testimonial: "Great Help"

SOURCE: 07 lexus rx 350 with check engine light code p0304

Hi, did you ever get an answer? I have the same issue. Thanks.