Question about Cars & Trucks
Wipers stopped working and I checked the fuses, and they were okay.
1A Auto shows you how to repair, install, fix, change or replace a broken, damaged, or failing windshield wiper motor. This video is applicable to the 97, 98, 99, 00, 01, 02, 03 Ford F150.
List of Auto Parts from 1AAuto.com Related to This Repair:
List of Tools Used in this 1AAuto.com How-To Video:
• Flat Blade Screwdriver
• Phillips Head Screwdriver
• 10mm Socket
• 15mm Socket
• 8mm Socket
• Socket Extensions
How to Install Replace Windshield Wiper Motor 1997 2003 Ford 150
Best wiper motor brands Best 10 Windshield Wiper Motor 2018 Easy Replacement Reviews Buyers Guide...
Posted on Apr 02, 2018
Don't buy a new motor yet:
It could be a fuse or at the switch.
It may not be a motor problem.
The wiper motor has 2 windings, fast and slow.
The wiper switch sends a ground signal to each motor winding.
There may be a problem on the relay, or at the switch or in the cable to the motor.
Hope this helps.
Posted on Apr 19, 2015
Posted on Nov 17, 2014
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
SOURCE: windshield wipers
The fuse panel is under the instrument panel to the left of the steering column. Lift the handle to unlatch the panel and pull it down. The windshield wiper/washer system uses a circuit breaker in position #2 in the fuse panel. If your washer is working the circuit breaker is OK.
Posted on Sep 22, 2008
SOURCE: its a 1997 montero sport
After you have checked all the fuses.
Please check the FUSE # 9 15amp. Is the fuse for the front wiper.
Behind left side of dash.
I'm watching the DIAGRAM for your wipers.
And I found. the relay, But is part of the Wiper Switch. on steering column.
With a Test light. check the BLUE wire for POWER 12V.
ON the wiper motor connector.
If yes try to hit softly with a metal piece.
With the wiper switch on. and ignition on.
If work you need to replace the wiper motor.
And letme know if work. or not.
OK> I hope this help on your problem.
Posted on Jul 25, 2008
check ALL fuses..check the wire connections at the wiper motor..un plug then plug in .the way to test the motor is to get some speaker wire (stop laughing) go from the battery to motor to by pass the switch .
Posted on Dec 23, 2008
I just pulled out every fuse one by one to see if they were broken and I found one that was broken and replaced it and now my windshield wipers work.
Posted on Jan 10, 2009
May want to look at replacing the wiper circuit board.It is located on the firewall adjacent to the wiper motor and has a some what square black cover with 3 torx screws and wireing harness pluged into the side.We had a truck that every time you washed it the wipers would stay on until it dryed out.You can try removing it and spaying it down with contact cleaner just watch the brease on the two contact tips.Well hope this helps.
Posted on Feb 05, 2010
Tips for a great answer:
Mar 29, 2018 | Ford Escape Cars & Trucks
Aug 17, 2013 | 1992 Lincoln Continental
Nov 30, 2012 | Cars & Trucks
Dec 19, 2010 | Audi A4 Cars & Trucks
Feb 26, 2010 | 2006 Kia Sportage
Sep 17, 2009 | 1998 Ford Windstar
May 22, 2009 | 2003 Chevrolet TrailBlazer
519 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: