I replaced all 4 sensors and the wiring harness but still getting service park assist on the dic.
Have you checked the fuse? If so, the module is located behind the left rear trim panel. Remove the panel to access. Below is a diagram of the trim panel and location of the module in BLUE>
Preliminary Procedures
Testimonial: "i replced the module but iam still getting service parkassist on the dic."
SOURCE: what is the fuse labeled on the fuse box for park assist for 2011 chevy traverse
Parking Assist Control Module
Parking Assist Distance Sensor
Parking Assist Warning Indicator
These are the components for your parking assist the fuse you are looking for is the ECM / PCM this is the main computer for the car if i had more info on ur problem I might be able to help you more
Circuit
Short to Ground
Open/High Resistance
Short to Voltage
Signal Performance
Headlamp Switch Off Signal
B257A 00
3
--
--
Park Lamp Switch On Signal
5
4
--
--
Headlamp Switch On Signal
B257A 00
2
--
--
Headlamp Ground
--
2, 3, 4
2
--
1. Headlamps Always On
2. Headlamps Inoperative From Switch
3. Unable To Turn OFF Automatic Headlamps
4. Park Lamps Inoperative From Switch
5. Park Lamps Always On
When the headlamp switch is in the OFF position, the body control module (BCM) receives a ground signal through the headlamp switch OFF circuit and an open signal on the park lamp ON circuit and headlamps ON circuit. When the headlamp switch is in the PARK or HEAD position, the BCM receives an open signal through the headlamp switch OFF circuit and a ground signal through the park lamp ON circuit or headlamp ON circuit.
Circuit/System Testing
1,997 views
Usually answered in minutes!
×