This video should help you get r done.
How To replace Install Engine Serpentine Belt 1996 99 Buick Lesabre 3 8L...
SOURCE: 1999 Pontiac Bonneville serpentine belt installation.
if you look by the crankshaft pulley to the right you will see a tubular looking shaft about 1" diameter , you will notice you can't get the belt out from under this piece , it has a nut on it , once you take the nut off , you will notice it has a star shaped point on the tip of the stud , it requires a reverse torx socket or wrench to remove the stud , when you get the stud out the tube piece it can be removed , then the belt comes off , replace the belt , now comes the tricky part , fitting that tube spacer back into its spot , it can be difficult , once its in place put the stud back in , and put the nut on and tighten it , your pretty much a pro now . thanks.
SOURCE: serpentine belt replacement 1994 chevt silverado 5.7 lt
call your local autozone and the will tell you over the phone or fax you a copy
SOURCE: Serpentine Belt diagram for 2001 pontiac
Below is the diagram you requested. Please return to rate this solution. Thank you very much.
Testimonial: "Thank you. You helped alot. Took off the belt not knowig their was not a diagram label on the car somewhere or in manual. Thanks again. J. Seats"
SOURCE: need a serpentine belt diagram for a 1999 Pontiac Bonneville
1999 Pontiac Bonneville V-6 3.8L
From Gates.com / Part Locator
I hope help you with this. Good luck.
256 views
Usually answered in minutes!
×