When I try to spray the windshield fluid on the rear windshield, the water leaks from inside the windshield (Rather than spraying outside through the nozzle). How can I check and replace the Tube if I find it leaking?
SOURCE: windshield fluid not spraying front back and lights in BMW X3
Follow the lines from the windshield to see if any are loose and follow to container,look where pump is connector to tank for leak.It may be empty.There's a rubber piece connected to tank where pump goes in,check it out there,you may have to remove tank to get to.
SOURCE: need to replace windshield sprayer on 1992 geo storm
Many are just force-fitted in the holes in which they are mounted.
There is no stress to speak of on them so little reason to pop out - well, unless someone is unnecessarily pulling on the connecting tube.
Removing the old and installing a new one wojuld be better done when the hood is warm to prevent breaking the replacement when inserting it.
BTW; is the pump motor running at all?
These are the pits as motors or pumps so could fail easily.
SOURCE: Rear windshield wiper sprayer
it might be in the motor pump or line is clog can you work the hose
131 views
Usually answered in minutes!
×