My 2003 Manual 2.9CRDi Kia sedona will not go into any gear was driving along went for fifth got nothing pulled over and it will not go into any gear the gearknob oves as if selected but the car just revs with no movement. Anybody know what it could be?
First thing to do is get underneath and check the linkage, make sure everything is connected.
Testimonial: "Done that and it is all connected"
SOURCE: Need to find free resources regarding 2003 Kia Rio Cinco Manual
here you go 11 is shift rod end oem# ok2n117423 , 16 shift rail , 18 snap ring , oem # ok30a17486 22 arm 
SOURCE: how do you change the right front headlight bulb on a kia sedona
Remove the headlight assembly. Just remove the 3 bolts with a 10 mm socket and pull it out so you can disconect the wire harness. After that pull the whole assembly out and unscrew the bulb cover. The bulb is held in with a spring clip.
SOURCE: 2002 Sedona: 2003 Kia Rio manual transmission, stick is stiff g...
I have the same car, the only solution to this problem is to tighten the clutch cable nut just as necessary until you feel that you are able to shift smoothly without forcing it, make sure you start the car to test for that.
You might have to remove the air intake in order to access the clutch cable.
If you tighten the nut too much, your clutch will feel light and you will have clutch slips. So basically keep trying until you're there. You can loosen or tighten the nut while the car is running, I'd recommend.
Source: Experience.
SOURCE: 2003 Kia Rio manual transmission, stick is stiff g...
I would check the operation of the shifter cable. It may need lubricated.
295 views
Usually answered in minutes!
×