How to replace front wheel hearing on a 2008

Replace the volume control(rheostat) inside the radio. Only way to fix it. I would personally just live with it until one or the other quits working. Then replace the radio.

Hi, replacing the front wheel bearings on any vehicle is difficult if you don,t have the right tools, as the driveshaft and wheel hub (where the bearing is seated) needs to be removed. The hub housing the bearing may have to be heated (depending on corrosion) when the bearing is being pressed out, by using a heavy duty vice , and the new bearing is pressed in using the vice and the old bearing as a guide. I would strongly suggest you refer this repair to someone who has done this before, I personally would not undertake to change front bearings ever again, the first time for me was an experience I wouldn't want to undertake again. All the best.

Radio volume control on 2008 Subaru Tribeca does not ...

www.fixya.com/.../t25735073-radio_volume_control_2008_subaru_trib...

Jun 7, 2015 - Radio volume control on 2008 Subaru Tribeca does not work, but remote volume control on steering wheel works. ... does not... Replace the volume control(rheostat) inside the radio. .... Oct 09, 2014 ' 2007 Subaru B9 Tribeca.

if the battery sits in front you will have to remove it.most imports now a days are like this.once the battery is removed you should have ample space to remove the bulb. just make sure that you use a clean rag to install the new one as you must not touch the glss part of the bulb with your fingers or oilly rags.befopre disconnecting the battery make sure you dont need a code to restart the car or use the radio.

replace them again and install with gloves on. Oils in your hands destroys these bulbs prematurely

Hello SUBY bro, kick me if I'm wrong but imho this should not be that complicated to require a schematic......Below is the reply I posted here on FixYa for another 08 Tribeca owner......Peace

We have an 05 Legacy and I've done this. Tribeca should be the same way: Look through the engine bay behind the light, you can locate the position by following the wires which actually connect to the bulb assembly. The bulb assembly ought to be removable with a 1/4-1/2 turn and pull motion. Be sure to not touch the replacement bulb with your bare hands. Your Subaru service ought to help you with this and not charge you......

Now I am really depressed. We thought we have a change from driving Honda and Toyota so we decided to buy a new 2009 Tribeca. My first oil change for this car was 1800 miles, after breaking in. I replaced it with 7 qts of Mobile 1 Full Synthetic. Currently, the car has 8900 miles, that is 7100 driven; unfornately, I just filled 3 qts of new Mobile 1. Luckily, I check!!! Is this normal for Tribeca? If so, this is the worst investment of a lifetime. I won't ever buy Subaru again or recommend to anyone!!!

could be valve seal in engine vehicle still under warranty take to dealership and have it replaced.

ITS STILL UNDER WARRANTY! LET THE DEALER TAKE CARE OF IT.