2005 Cadillac SRX Logo
A
Anonymous Posted on Oct 14, 2014

<!-- from fixya rte -->Broken hood release latch - 2005 Cadillac SRX

1 Answer

BrotherGrim

Level 2:

An expert who has achieved level 2 by getting 100 points

MVP:

An expert that got 5 achievements.

Novelist:

An expert who has written 50 answers of more than 400 characters.

Scholar:

An expert who has written 20 answers of more than 400 characters.

  • Expert 95 Answers
  • Posted on Oct 14, 2014
BrotherGrim
Expert
Level 2:

An expert who has achieved level 2 by getting 100 points

MVP:

An expert that got 5 achievements.

Novelist:

An expert who has written 50 answers of more than 400 characters.

Scholar:

An expert who has written 20 answers of more than 400 characters.

Joined: Feb 02, 2010
Answers
95
Questions
0
Helped
22565
Points
253

Well, hard to tell the exact cause without seeing it, but if you mean the hood latch itself, you may have to reach up from under the engine bay and release it manually, remove it and replace it, any good auto parts store would have or could order one. If it's the cable, you could try pulling it with vise grips or pliers - assuming it's even reachable. Best case scenario, the release handle has just separated from the cable, could be re-attached or replaced easily enough. If you manage to open the hood, get someone to pull the release a few times so you can find the cable, follow it both ways and you may find the problem. Wish I could be more help, good luck.

2 Related Answers

Anonymous

  • 160 Answers
  • Posted on Jul 31, 2009

SOURCE: 1999 cadallic deville how to open hood broken cable

You can find the cable with a little effort. It comes out of the firewall so see if you can find enough of the end of it still sticking into the cabin to pull. Otherwise you can also look under the car and you should be able to get to it from there. Hope it helps!

Ad

Anonymous

  • 2 Answers
  • Posted on Mar 17, 2012

SOURCE: 1988 hood latch will nor

hood release is easy.make a tool - buy small steel rod from hardware store.1st bend 1 inch slight hook2nd bend 3 to 5 inches at 60 degrees anglefold over the handle twice and tape.slide in fish and pull. it opens easy and i can get it within 10 seconds.look at pictures. you need a stiff rod so don'i use a hanger and buythe steel rod same *** as a hanger -thin. bend in vice.so easy. 3_17_2012_8_20_05_pm.jpg3_17_2012_8_20_31_pm.jpg3_17_2012_8_20_53_pm.jpg3_17_2012_8_21_18_pm.jpg

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

2003 Volkswagen Passat hood release system

When you say: Grill hood release is broken
which component are you talking about ?
Is the cable that runs from inside the cabin to the latch mechanism broken, or
is the actual latch mechanism is what broke.
1helpful
1answer

2005 quattro , battery is dead and hood wont release.Is it an elecrtonic release?

Heidi, No electric release. The latch is probably stuck. While you pull the interior hood release have an assistant push down and pull up repeatably/vigorously until hood releases from stuck position. Lube latch and cable before closing hood. Check the attached links,instruction and guides, Good luck
"I hope this helped you out, if so let me know by pressing the helpful button. Check out some of my other posts if you need more tips and info."
Open Hood How To 2001 2005 Audi Allroad Quattro 2002 Audi Allroad Quattro...
2007 Audi A4 2 0t hood latch fix when you can pop the hood
Hood Latch Release Cable Broken How to open hood
Help Hood release cable disconnected somewhere any ideas how to open hood...
0helpful
1answer

2010 Mazda Mazda3 hood release broken... How do I get the hood open?

You can use a some pliers and aluminum wire to open a car hood if the latch is broken. You will also need a light to shine towards the latch. Try to connect the wire around the latch that will release the hook for the hood.
0helpful
1answer

Hood wont open

It may be that your hood release cable that runs from the hood release is broken. You'r going to have to try and manually release the hood latch by tripping the release through the grill with something like a long screwdriver. You should be able to identify the latch trigger by following the cable to end.
You might also try having push down on the hood while another person tries to trip the latch if the cable isn't broken, but just stuck.

0helpful
1answer

How to open a broken hood latch on 2000 ford explorer

if it is broken from inside the cab, skin the cable housing until you get to the cable and grab it with pliers or vice grips and pull the release. If it is broken from the latch under the hood you are going to need to get to the latch and release it with something, anything that you can get in there and pull the release latch.
0helpful
1answer

Broken hood release cable how to open hood

you can often release the hood latch from under the car, or through the grille, by reaching up to the hood latch mechanism with a long screwdriver or pliers, or a piece of coat hanger, whichever works in your particular case. G/L
0helpful
1answer

Hood release under the dash has no tension on it. Hood will not latch closed

The latch is stuck in the open position. I always found white lithium grease worked best on those latches but any good lubricant will work. Try moving the latch manually with a screwdriver. After applying the lubricant move the latch a few times. You should see the tension return to the release, if it doesn't you have a broken release cable.
2helpful
2answers

2000 Chevy Blazer with Broken Hood Release. How do I open the hood

can you reach the cable itself?,or is it broke at the hood latch?IF its not broken at the outside latch, try to follow the cable,un-hook it from the handle and pull on the wire cable to open it.IF its broken at the latch itself,you are going to have to reach the latch through the grille and try to pull the lever the cable connects to.That part is no fun at all..!!
0helpful
1answer

My hood latch is broken on my 2001 Subaru Outback. How do I manually opent the hood? I think my problem is the same. I have a 1997 Legacy--when I pop the hood, it releases, but I can't located the latch...

If the cable link to the latch is rusty or broken you have to take the front grid down. It's relatively easy. It's held there by plastic fasteners. Then reach for the latch with you hand, or the leftover broken cable. Pull it, it should release the first latch, than you just have to get to the security latch, like you usually do to open the hood.
0helpful
1answer

Hood release latch is broken

find the cable that is supposed to attach to the latch, and grab it with a pair of pliers or the like and pull.
Not finding what you are looking for?

917 views

Ask a Question

Usually answered in minutes!

Top Cadillac Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6988 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a Cadillac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...