- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
The only way to reset a SRS light is to fix the problem that is causing it to come on. Once the problem is fixed and the SRS module acknowledges a complete circuit, the light will go off automatically.
To reset the SRS light on an Acura Integra, pull down the SRS service connector. Unplug this connector so you have access to jump the harness. Start with the ignition OFF. Jump the SRS plug. Turn the ignition ON. The SRS light will come on then off.------------------------------------------------------------------------------ autel maxidas ds708
If the SRS light is on it means that a problem with the SRS has been detected and an error code has been stored in the relevant computer modules. If there is no fault the SRS light will go off after disconnecting battery terminals for five minutes (make sure you have stereo code if needed). Most of the times the light cannot be reset unless the fault causing the problem is fied (e.g. defective SRS sensor). The best thing to do is a code scanning that will also reset the light, followed with troubleshooting and repair of the problem that is triggering the SRS warning.
SRS sensors are located under hood in engine compartment. They're bright orange/red and are cylindrical in shape. If your SRS lights are on, you need a special reset tool (very expensive tool) to reset. Any good shop including body shops have SRS reset tools and can reset your lights.
The SRS, or supplemental restraint system, on your Honda Accord 2002,
Read more: How to Reset a Honda Accord SRS Light | eHow.comhttp://www.ehow.com/how_6403892_reset-honda-accord-srs-light.html#ixzz0tQdveFZn
responsible for deploying the airbag in the event of an accident. If this system is malfunctioning, the airbag may not deploy properly during an accident. However, the system does warn you of a system malfunction. The yellow "SRS" light on the dash will light up, indicating a problem with the system. Once you've fixed the problem, you need to know how to reset the SRS light on your Accord
Hi,
Joe here to help,
Without going to a dealer, you need to get a scan tool to reset the srs light. Go to an Autozone store, They will scan it and reset it free of charge.
The SRS light refers to your airbags. You can try reseting the light by going to the webpage that I will give you. If it comes back on after you reset it then there is a problem with your SRS system and you will need to have it diagnosed as your airbags will not function when the light is on. Here is the website:
×