After changing trasmmission oil gear one stop selecting, please help
SOURCE: Toyota Mr2 Automatic transmition problems
It sounds like maybe the torque converter might not be fully seated into the trans, try taking it out and re install and turn the converter clockwise then counterclockwise while keeping pressure on the front of the conv. until you feel three little clicks or thuds. When it is fully seated you should barely be able to get your fingers between the the bell housing and the converter. while you have the converter out check the front pump seal again for damage if it looks chewed replace it put some trans fluid on the hub that goes into trans, the shiney part then slide it in. Hope that helps also when installing the trans make sure you tighten the bellhousing bolts first then do the torque converter bolts, that way you won't accidently unseat the conv. You have to turn the flywheel to get to all the bolts make sure everything is tight and good luck.
SOURCE: Changing the ac compressor 2001 toyota echo
first you need to empty the free on out of the system then pull off the belts and then just pull out the bolts for the compressor
SOURCE: what type oil do I use in my 2002 toyota echo
5w30 weight Oil is reccomended for most temperatures for your vehicle. You will use just a little under 4 quarts of oil to achieve a proper reading on your oil dipstick.
327 views
Usually answered in minutes!
×