Top of the tappet cover there is a rubber hose hooked to the egr valve that seats into the valve cover
SOURCE: EGR Valve
i have two qution, how can i replace the egr valve, where is the power window and seat fuse?
SOURCE: egr valve location
The EGR Valve Location is typically housed on the intake manifold this schematic may help you
http://www.autozone.com/shopping/repairGuide.htm?pageId=0900c1528008822d
SOURCE: How to replace the drivers side mirror on Toyota
Pop the plastic cover off at the corner of the door where the mirror is. Unscrew the mirror (have your hand on the mirror!) and push out. Replace in reverse order.
SOURCE: 96 toyota tercel rear brake repair
They tend to get really stuck, especially if they haven't been changed in a while. A few raps with a hammer on all sides will usually get the job done. Best of luck.
Greg
SOURCE: EGR VALVE ON 96 FORD PROBE SE
If it's a 2.0L, 5 speed (1994-7) there are two DPFE solenoids (both w/ 3 vacuum ports) near the oil filter, which control the EGR valve. They are discontinued and impossible to find except on junked cars. (FORD #'s K5T44093-4)
I have to junk my 1996 Probe if I don't find them - Missouri emissions.
418 views
Usually answered in minutes!
×